Sully Posted December 7, 2011 Share Posted December 7, 2011 Posted my "first moon" pic the other day, but can anyone advise on how to get a wider fov. Advice much appreciated.Cheers Sully Link to comment Share on other sites More sharing options...
John Posted December 7, 2011 Share Posted December 7, 2011 You could use a focal reducer which screws on like a filter:Antares Antares 1.25" focal reducer 0.5x Link to comment Share on other sites More sharing options...
Sully Posted December 8, 2011 Author Share Posted December 8, 2011 Thanks John,Apparently my current fov is equivalent to 6mm, will a reducer affect my view visually? Link to comment Share on other sites More sharing options...
steelfixer Posted December 8, 2011 Share Posted December 8, 2011 Sully you might have a problem with a focal reducer on your newt.I bought one for my 8 inch to try and solve the same issue.When I fitted it I found I did not have enough inward travel on the focuser to get the image into focus.Still all was not lost as I now have it fitted to my guide scope. Link to comment Share on other sites More sharing options...
Cornelius Varley Posted December 8, 2011 Share Posted December 8, 2011 To get a wider field of view you need to create a mosaic of several images stitched together in Microsoft ICE. Take a look in the http://stargazerslounge.com/imaging-lunar/125523-2010-lunar-imaging-showcase.html. There are three images of mine towards to bottom of the page. The first two , Clavius and Copernicus are single AVIs, the third of Plato and the surrounding area is a mosaic of 6 AVIs stitched together in MICE. All three were imaged at the same focal length (3600mm) and the same equipment.Focal reducers don't always work due to a lack of focuser travel.Peter Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.