Help with Jupiter

[SimonfromSussex]

Hi All,

Here is my third go at Jupiter but i still dont seem to be able to nail the detail yet.

I have checked collimation before I started and i'm pretty sure focus was pretty close.

After taking the raw AVI i moved directly to the moon (without changing any settings) to check my focus and this shot looks ok?

Is it simply atmospherics that are holding me back or is there anything else I can work on to improve?

Any help or pointers would be greatly appreciated.

Skywatcher 300p dob with a x3 barlow.

Settings as follows:

[Philips SPC 900NC PC Camera]

Resolution=640x480

Frame Rate (fps)=10.00

Colour Space / Compression=YUY2

Exposure=-5

Brightness=64

Contrast=32

Saturation=14

Gamma=1

ColorEnable=255

BacklightCompensation=0

Gain=17

[Space Cowboy]

What stands out to me on your settings is the gain being very low. The image looks like it needs higher wavelet settings but does that produce onion rings as this will happen if gain is very low. I would try using a faster shutter speed with higher gain (over 50%).