Starlight 1
-
Posts
3,302 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by Starlight 1
-
-
I say if you take the top part off and the bent arm the will go back to round as I can not see any dents that will hold it in as it just a bit of work on the top part and repaint.
- 1
-
Are you running by hand set, or to mount with out the hand set.
-
1 minute ago, Gina said:
Never had any problem with ZWO cameras except when one got filled with rainwater and stopped working - can't blame ZWO for that!!
Blame someone Gina, 3d printer .
- 1
-
my old Heq5 pro mount was very good I could do a 1 shot for 1 hour spot on (on a good day) So may be the nobs I said about was one thing that was a down side and the encoder the way it work just did not like it so sold it . So it work out at £100 a hour and I got to the point trying to set it up as I wanted it to do I pack it up and back in the box for the next 2 years and said I not going use that any more.
-
I did not like my AZEQ6-GT and sold it after 5 hours of use for 40% of list price.
-
Yes the 2 locking nobs the wires from the mount when it move round get caught on the inside of the nobs , do that help. Les
-
The AZEQ6 -GT have 2 nobs one each side and the cables do not run over them I made 2 cones to go over the top .
- 1
-
Somthing like this. I been out of Astro a long time hard to say if this will work work of not.https://www.firstlightoptics.com/all-astro-imaging/sky-watcher-evoguide-50ed-guidescope.html
-
If you can come up with a drawing I can see what it like in the way of size on the plan as well.
1 hour ago, JamesF said:reasonable drawing
-
As I see it 2 battery must be the same to set this like 2 gel as you can only put 1 number in , it look for the low battery and send more to the low one I set as 50/50 it spit the solar by 2
-
There is a free one can not rember the name , it work be you ask then to take photos of what part of the sky and there send you a email of it when done in RGB so you can do the work in your own time to get the end photo.. I did put a link in on here got to be 4 years ago .
-
Was thinking with today modem technology was there a good way , back in the 80s 9os I was using my old proton detector .
-
Is there a good way to work this out .?
-
-
I think I still have 2 eq1 mounts in the shed I go and look on Friday .
- 1
-
7 minutes ago, fozzybear said:
Betamax was before vhs but never kicked off and vhs won anyone remember video disks?
No I do not remember video disks , I have a 2000 that record on 2 sides
-
1 hour ago, DaveS said:
Well done for rescuing an unloved 'scope. It always saddens / upsets me to see a 'scope just tossed out with the rubbish.
Is that not the way of the world today, I give up 2 years ago and I see it as just rubbish to go in the bin when I have the next clear out.
-
20 hours ago, Tommohawk said:
The payload for the HEQ5 is given as 15kg, and the PDS250 is pretty much that weight I think
The mount will handle it, but you'll be on the limit and may need an extra weight to balance. I use a 250 Quattro on an HEQ5 but from memory I think I need an extra weight.
Spot on, been there not only a extra weight a long bar as well ,and it will not hold in any wind at all , Heq5 and PDS 250 is a pain you can do with out.
-
I just use them big poly boxes that shops get the veg come in .
-
It look like same one I got 3 years ago went back after 2 days was told it take 16 gb of memory 4 hours later thay give up and i got the mac i7 for the wife just to use on ebay so her £600 chrismas ended up as £1800
-
-
-
Was on show for a good 30 mins.
-
Just put one in. ( same post)
Oh heck, that is not going to polish out! 😱😞
in The Astro Lounge
Posted
If you like to repair it Stu I tell you to the top back round again take around 20 mins.