Odd Behaviour NEQ Pro 6

[Demon Barber]

Hi All just a quick check,my mount has developed an odd behaviour when slewing,it passes  the target, then back and then finally settles on it`s given target,any one got any idea`s? (this is a new to me)  behaviour,did the rowan belt mod some six months ago and all has been functioning normally,when using my camera`s there are large amounts of what appears to be drift,even for short durations,seems to have just started.

Regards

Mike

[Uplooker]

Is the mount securely bolted to the tripod / pier?

[Demon Barber]

Good one Ian,yes,

Mike

[Uplooker]

Hi Mike, was that a yes, it was loose or yes it was a good suggestion but it was tight????

Sent from my Fone

[Demon Barber]

Ian more a resigned yes i have checked all the usual suspects and am just about to start to go back to the eq mod wiki and check parameters im sure its something simple,but cannot explain why there should be so much trailing in my photo`s

Bit fed up,but i `ll get there

Regards

Mike

[Cath]

Does the mount have setting to adjust the approach speed (approach to target position) ?

Does it seem as if it's going a little to fast and so over shooting the desired spot ?

[Demon Barber]

Hi Cath no, approach speed seems normal,it is acting more like my Argonavis equpied Obsession scope hope to find something in the setup

,even the polarscope led has brightened on its own!

will update when i have had another go tonight,

Regards

Mike