Cases for Filters

[SniffTheGlove]

Looking good Sniff. What foam did you put into the cases?

It is normal seat cushion foam that my wife gets from Dunelms Shop

I got 2 sizes 3in is what you see in the photo, I also got 1in. which is goting to be the top cover cushion for the EP box. ie it will fit in the lid to hold things snug.

To cust the slots I usage a stanley knife with a 2 inch blade which I sliced out the slots with then I needed to pull the sliced bit to one side then cut sideways slowly to give me a rought but level bottom to the cutout.

I then used a flapper sander disk to smooth the lumps and bumps out along the sides and bottom. Then I put some PVA into the bottom and a piece of thick fabric just to line the bottom.

Total cost including the hobby case(£8 from Focus DIY) was £13. I brought 2 cases. One for EP's and the other for the twin SPC880 Modded cameras.

[spaceboy]

All works very Sniff and for next to nothing