ASI 2600MM + ZWO 7x2" Filter wheel imaging train advice please

[oymd]

Good evening everyone

I've recently purchased 2600MM and a 7x2 ZWO filter wheel.

I'm staking my first steps in Mono imaging. Will be using this setup with an Esprit 100.

Can someone please advise on what is the best way to connect the camera to the EFW?

My experience so far has been with OSC, using the 294MC Pro, and never used an EFW before.

I bought the EFW used, so might be missing some adaptors, but the camera was new, so all bits and bobs should be there.

I can see that the EFW has holes on it? Does the camera attach to the EFW using adaptors, or using the screw holes?

Some pics of your actual setup would be very helpful?

Many thanks

Ossi

[scotty38]

I believe the 2600s can bolt to these filter wheels

Edited October 4, 2022 by scotty38

[oymd]

1 hour ago, scotty38 said:

I believe the 2600s can bolt to these filter wheels

That’s what is suspected, but was hoping for some advice regarding this?

how’s it done?

[oymd]

I’ve just had a look at my EFW package. 
 

I'm missing the 6 silver M2.5 screws needed to fix the EFW to the camera. 
 

Can I buy those separately?

[scotty38]

Once you've determined the length you need Amazon and Ebay will be rife with them. Try and get black if you can too, may as well cut down on reflections.