CEM 26 WIFI in ASI air v1 connection?

[Look left]

Cannot connect CEM 26 onto ASI air v1 using a tablet.

AsIair sees the WIFI signal from the mount handset. HBX 849 .

connecting to the ASI air signal going into the Scope icon trying to select mount but it only shows CEM 26 EC not just CEM 26 .  Selecting Ethernet, 10.0.0 etc selecting buad rate actually tried them all . But does not connect.

i have asked on ASIair forum , tried contacting ZWO support.

has anyone actually done this and can you guid e me through it please.

[Feccy]

Might not be relevant, but I have been setting up my CEM26 with Astroberry and couldn't get a mount connection until I adjusted the baud rate to 115000 - worked fine then but any other setting didn't

 

Hope that helps?

[Look left]

Actually got it working now. Went onto ZWO support and they got me to change the settings on the tablet ASIair feed by altering the STA settings.

thanks for replying .

[Look left]

Just a note the Cem 26 must have the HC installed on the mount to get WIFI .

i,ve got it connected to the ASIair and you need the HC in tonget the WIFI and ASIair to communicate.