Skytee strip down

[Steve Clay]

Seeing as the weather today in SW Cornwall has been totally rubbish. I've stripped down the skytee,  re greased and adjusted out the backlash and clutches.

Very easy job and it's now smooth as silk

[Captain Scarlet]

Will you be giving us a step by step guide (yes please) or is it so easy as to be unnecessary?
M

[Steve Clay]

30 minutes ago, Captain Magenta said:

Will you be giving us a step by step guide (yes please) or is it so easy as to be unnecessary?
M

There is a guide on here somewhere that I read ages ago. Its really simple.  Just do each bit at a time.  If there is a bolt or grubscrew just undo it. It comes apart really easily. Remove the old grease with WD40 and a stiff brush. I re greased with Aero Shell 33. Once reassembled clean it all off with WD40. The synta grease has the consistency of molten plastic. Took an old bed sheet as rags to clean it all off.

[skybadger]

Id have had that synta grease. Its perfect for wormwheels. Not so much use on axles though.