Re assembling my neq6

[petergc]

Hi everyone. It's been while since I've posted but I need some help. I have finally completed the Gunnar mod to my mount and I'm having issues. 

When I put the two parts back together as shown in picture there seems to be some play. I have tightened the grub screws but still have issues with the left to right play. It's not a lot but enough.

I have some shims and a big steel washer. The big washer is so the grub screws can clamp down on. I have two plastic shims also. It took me some time to complete the mod so I can't actually remember which way around the parts go back together. Also not sure if I have lost some shims?

Any advise would be great thanks.

[Singlin]

You are correct in that the steel washer goes on the side of the grub screws.

You shoulld have a large teflon shim that goes on the opposite side.

Tighten the main bolt as much as possible and then the grub screws.

[petergc]

5 hours ago, Singlin said:

You are correct in that the steel washer goes on the side of the grub screws.

You shoulld have a large teflon shim that goes on the opposite side.

Tighten the main bolt as much as possible and then the grub screws.

Thank you . I will have a go after my trip to the park and report back.