Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

Skywatcher auto focuser on Celestron


Recommended Posts

Hi all,
Could anyone tell me if the Skywatcher electric dual speed auto focuser will work on a Celestron nexstar 130slt?
I know the Orion accufocuser will work and the Skywatcher model looks very similar.
Any help/advice appreciated.
Thanks.
Gareth

Link to comment
Share on other sites

Hi. As long as the shaft that you are attaching the Autofocuser onto is approx 8.5mm thick, and also as long as the two screws closest to the side that you want to attach the motor and the bracket onto underneath the telescope are approx 14mm centre to centre it looks as though it should do. However, don't quote me on that. Just measured the shaft that my Auto focuser was on, and the two screws that held the bracket with the motor on in place underneath the focuser too.

 

Link to comment
Share on other sites

Hi,

Thanks for the info knighty2112, I've just had a measure and the Celestron has the same sizes as you mention.

I think I'll give it a go and will let you know how I get on, if worst comes to the worst I have access to engineering materials so I could probably adapt it.

many thanks.

Gareth

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.