Stellarium not slewing to correct location

[Russe]

I'm flummoxed! Please help!

I've been using ASCOM/EQMOD for a while but had to put my scope away for almost a year due to work commitments. Now I'm setting everything up and it doesn't work anymore???

HEQ5 with updated firmware synscan connected to my usual laptop.

StellariumScope connects nicely and alignmaster aligns brilliantly.

But - here it comes - as soon as I'm ready for action, the Alt1 command doesn't slew the scope to the right location but stops halfway???????

What to do???

[Russe]

For example - right now I can choose the pair of Pollux and Caph. Goes there without problem. I finish alignment and use Alt1 to go to another location - it will only go if I choose a far enough star but then goes only half way??!!

[Russe]

If I go to EQMOD - I can put it into park and that works. If I unpark and chose another pair - say Procyon and Caph in Alignmaster - it slews without fail.

But again, I'm trying the Alt1 command in Stellarium and click slew scope, it won't go...

[Russe]

Like from Caph it won't slew to Errai in Ceph. But it starts slewing if I choose M92 but goes to a point half way between Caph and M92 without fail. What am I missing???

[Russe]

From that point it won't go back to Caph as well...

But if I park to home it goes to home...

[Russe]

Even a virtual telescope does the same????

Re-install Stellarium???

[Russe]

RA/DE shows the same numbers in Stellarium and in EQMOD.

Az/Alt is slightly different though...

[Russe]

I'm an idiot....

You may delete this thread...

Alt+1 moves scope 1 to object in CENTER of screen...

Ctrl+1 slews to selected location...