SW 150p Polar Scope

[mikey32shaw]

Hi all, I am just trying to calibrate my polar scope and need to do a little fine tuning. Problem is the three screws you need to adjust on the polar scope are ultra tiny :-/ what tool is best being used for this? They don't seem to be anything tried electrical cross head drivers or is it a small allen key?

Thanks in advance

[Stargazer_00]

Can you take a photo and post it? Might be easier to help.

[mikey32shaw]

I will try on my phone but they are tiny.

[mikey32shaw]

hope this has gone on. There are three of these and it says adjust to calibrate

[Helite]

If it's the same as mine should be a 1.5mm allen key, or you can get away with a torx 6 as well in it I think.

[mikey32shaw]

Nice one thanks for that trip to B&Q later for me.

[Stargazer_00]

Bit late but yeah thats an Allen key

[glowjet]

Be careful how you make your adjustments, the grub screws can be a bit tight, 1/8 turn at the most or you will have the reticule fall out and you will finish up taking the thing to bits to reassemble it

John.