Meade DSI CCD - can i use it with a Celestron GT mount?

[cygnusx1]

Ok folks help me out here please,

I bought a DSI to use as an autoguider or imager, but after trying to run Autostar from my laptop to handset (via RJ11 cable + DB9/RJ11 adapter ) ,i don't seem to be able to connect or get it to work

I've installed the ASCOM drivers, but will I actually be able to get it to talk to a Celestron mount or do I specifically need a Meade mount for DSI??

Clueless at this stage :insects1:

[barkis]

Is the com port configured and recognized Kevin. I don't see there should be a problem getting a DSI to communicate. My initial problems were all down to the Com Port.

Just play away, you will crack it in the end.

Ron.

EDIT. I don't know if this site will help. Worth a look Kev.

http://autostarsuite.net/forums/storage/19/5478/Autoguiding%20with%20the%20DSI.pdf