Radders Posted August 18, 2012 Share Posted August 18, 2012 I really fancy the idea of a goto mount for my Astromaster 130eq but was wondering how it would fit to a fork type mount? Is there a different type of bar? Or would people not advise doing this? Radders Link to comment Share on other sites More sharing options...
Capricorn Posted August 18, 2012 Share Posted August 18, 2012 Since it already on an EQ mount the simple option would be an EQ3 with goto.It will not fit a fork mount, a fork being one bit either side.It could be attached to a single arm mount, I suspect that the dovetail you have could be used.Problem with the single arm is that the OTA could be too long, they usually use short tubes and I have the suspicision that yours is not the short variant. Link to comment Share on other sites More sharing options...
Radders Posted August 18, 2012 Author Share Posted August 18, 2012 Thanks will have a look at the EQ3. I did mean the single arm mounts sorry...Your suspicions are correct, it is the longer type. Link to comment Share on other sites More sharing options...
mallorcasaint Posted August 18, 2012 Share Posted August 18, 2012 I've had a SW 130p on an ALT/AZ single arm mount and it was fine. I would recommend an EQ3 mount though. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.