Celestron NexStar SLT mount problem

[Veegs23]

The azimuth function has completely died. The altitude works great still. I've had the mount for little over a week now. Anyone heard or have this same problem?

[Baffa]

Mine died after a couple of months, the quality of those motors seems to be quite bad.

I haven't replaced the motor assy yet and probably won't, I have removed the az motor and converted the mount into a manual one Some tape and an old broomstick stick and a few adjustments to the screws to get the right friction will be enough for me until I will get a new proper mount.

Skickat från min HTC Desire S via Tapatalk 2

[Veegs23]

Not a bad idea! I've read a few complaints and all were concerned about the cost of shipping over seas. My one lucky star may be living semi-near to Celestron's factory and HQ... But still ridiculous we get sold a bum product and are expected to pay the price of shipping and of course waiting... If you get a chance to post a pic of your modified mount, that would be greatly appreciated! Thanks anyways for chiming in!

[dph1nm]

My mount and a friend's mount both died in azimuth within the guarantee period (i.e. <1yr). Replaced by the dealer and no problems since then (2 yrs or so).

NigelM

[Veegs23]

I talked to the service rep and he wants the entire unit sent back for a replacement. I really hope this is the only time.

[Veegs23]

Sounds like this is a serious problem with the model. I found posts as far back as 07 pertaining to motor issues that resulted in full replacements. I kinda wish I knew that before buying.