triden Posted September 2, 2011 Share Posted September 2, 2011 I've come to collimating my Skywatcher 200 PDS. Trying the secondary mirror, but the screws seem to be too tight, and are flexing the spider arms. Anything I can do? I'm a complete beginner. Help! Link to comment Share on other sites More sharing options...
MatthewC Posted September 2, 2011 Share Posted September 2, 2011 Try loosening off the centre screw by about half a turn first. The 3 tilt adjustment screws should loosen easily enough then. Link to comment Share on other sites More sharing options...
triden Posted September 2, 2011 Author Share Posted September 2, 2011 The centre screw is also very tight, and trying to turn it has the same effect. All the spider arms start bending. Link to comment Share on other sites More sharing options...
Stephen Posted September 2, 2011 Share Posted September 2, 2011 The centre screw is also very tight, and trying to turn it has the same effect. All the spider arms start bending.I'd remove the whole spider/secondary assembly from the tube and have a go at that centre screw where you can stop the vanes flexing. Link to comment Share on other sites More sharing options...
triden Posted September 2, 2011 Author Share Posted September 2, 2011 Ok, got it. Thanks for the help! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.