Glennbloke

I have a link to my diy budget observatory build. I converted a 6’ x 6’ keter shed to a roll off roof observatory. Its a very easy conversion and affordable. Completely enhances your hobby.

There are 4 countersunk holes for mounting the plate. My plan is to drill holes through the metal plate I have below and dropping from that will be 4 M10 threaded studs that will set into concrete. I then have 4 M10-M8 adapters that are 40mm high that the adaptor plate will screw down to leaving a large enough gap to get to the centre screw to tighten down the mount. I just want to try and confirm which of the holes is the correct one for the Az pin for the EQ6 R Pro. Once its in I can't really change it (not easily) anyways but once i confirm correct hole and I am assuming its the larger of the 2 together at top of image I can set that at North.

Hi,

I am hoping somebody may be able to help me. I am building a pier for a new mount I have on order (still awaiting arrival)

Its for an EQ6 R Pro. I bought a pier adaptor from Altair Astro and I think I know which way up it goes but really want to confirm this before I set it into concrete. As with most Astro gear it came with no paperwork or directions and the adaptor is for numerous mounts. Any help would be greatly appreciated. I had asked on the Altair page but no one has responded 

 I use the AZ GTI  On a Sw star adventurer mount successfully, replace the locking screw with an M8 grub screw, nice neat solution.