Jump to content

Captain Scarlet

Members
 View Profile  See their activity

  • Posts

    2,550

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Posts posted by Captain Scarlet

    3 clear nights, 3 scopes, 2 mounts, 2 diagonals...

    in Observing - Reports

    Posted

    This last weekend was unprecedented: three clear(ish) night in a row, and the opportunity to use all three of them to play with my toys. I observed nothing particularly exotic, but there were some interesting moments nonetheless. On top of all 3 nights of the weekend, I got to use all 3 of my scopes, used both mounts, compared two premium 2” diagonals and learned how dramatically tube currents can utterly destroy one’s view (think hairdryer).

    Friday.

    As soon as I got home from work on Friday evening I took my Newt and Mak outside to cool. It was a crystal clear night, no cloud appeared at any point, and as the night went on my SQM-L reached 19.14, nearly as dark as I’ve recorded here (I have lots of data now) and significantly better than lightpollutionmap.info’s Atlas estimation of 19.05 for my location.

    With my 8” Newt mounted on my EQM-35 pro, I spent quite some time staring at Sirius, trying to spot the Pup. I sort of imagined I saw something for a brief moment, but hand on heart I don’t think I did. Rigel and its companion were very easy by comparison and Castor was lovely. I spent similar time on M42 to try to spot the E star, again to no avail, but the nebulosity did show better and better contrast as the magnification got higher.

    I had intended also to give my SW Mak 150 its First Light (!!!) after doing a straight swap with @FZ1 for my Mak 127 back in June. Unfortunately even as I lifted it I saw it was completely covered in dew! I abandoned that idea and continued with the Newt.

    I vainly tried for my only deep-deep-sky object of the night, M81, but not a sausage. Although it looked clear enough for me to be able theoretically to see it, dew I think prevented it. M51 is out of the question at this time of year as my view East is blocked by my house, I only see anything above 50 degrees alt in that direction. Dew eventually did for me altogether and I turned in around 0200.

    Saturday.

    Saturday was forecast equally clear but in the event the whole evening was characterized by thin wispy cloud and occasional bands of thicker stuff. Not enough to send me back inside, but enough to not bother taking darkness measurements.

    I decided to polar align and “star-align” as accurately as possible: I sometimes regard the handset’s “report” of how accurate, after the star-alignment, it reckons your polar alignment is, to be a form of competition. I polar-aligned with the mount fully loaded, for example, and used a high-quality cross-hair finder eyepiece to get my alignment stars exactly dead centre, neither of which I normally bother to do. As a result, my “report” was the best yet, both alt and az errors at less than 10 arc-minutes by the handset’s reckoning. The “goto” was also notably accurate for the whole night.

    Using the EQ mount again, I started the evening off with the Newt and later swapped over to the Mak, having this time brought out a hairdryer, kept the Mak’s front cap on and brought out its wrap-around dewshield. I had a quick go at Sirius again, to no avail, also Rigel, Castor and Algieba, once Leo had pranced over the edge of the house. I had a quick glimpse of Uranus, a bluish disc but faint through the thin cloud so I didn’t spend much time on it.

    The hairdryer did its stuff on eyepiece and secondary (for the newt) and kept dew off the Mak, but what was really interesting was the tube currents in the Newt immediately after using it! I was pointing at Castor, a lovely brilliant pair of highly distinct matched dots. I applied the hairdryer and immediately on re-viewing, the two dots had become one huge smeared fluid mobile splodge! Racking out the focus revealed violently-moving diffraction rings. After 10-20 seconds though, it settled down as the warm air got driven out and Castor reverted to its prior state. Fascinating.

    What ended the evening was dew again, but differently. Dew had become ice, covering everything that I hadn’t hair-dried.

    Sunday.

    Two 2am nights on the trot normally precludes a third late night, especially if it's Sunday. But having gone outside to see if I could spot Venus through binoculars during the full daylight afternoon and succeeded, I thought why not, if only to see Venus through a telescope before it got too dark and the planet too bright.

    This time I dragged out my SkyTee2 and put my 105 f/6.2 LZOS refractor on it. Using my bevel-box to fix the mount to around 24 degrees elevation, I scanned left and right with the 35mm Panoptic for a binoculars-like 18.6x until I found it, and climbed the magnification ladder. Most pleasing was 108x, but 186x was a bit too much: wobbly and too-visible diffraction artifacts. However Venus’ 77% phase was perfectly evident, the first time I’ve magnified it that much. My best ever view of Venus, though i don't have much experience with it.

    What was especially interesting, though, was the difference between 2 diagonals I had with me. I started off with my Baader Zeiss BBHS 2” prism diagonal, very expensive, and at the higher magnifications there was obvious Chromatic Aberration on Venus. When I switched to my Revelation 99% dielectric mirror diagonal, there was none. So I guess f/6.2 is still too open a light cone for the prism to come into its own. The same test on my f/12 Mak 150 and f/10 Intes M603 will be interesting…

    I finished off the night popping out from time to time as my chicken was roasting, by framing the Pleiades, Orion’s whole sword and Stu’s S at 18.6x with the Panoptic 35mm – lovely fields and trains of pinpoint stars. Except as I was looking at, I think, The Pleiades, bright dot after bright dot streaked through my view, exactly in line and one after the other. Courtesy of Mr Musk, I think.

    Cheers, Magnus

    • Like 13

    Sirius and Pup separation over the years

    in Observing - Discussion

    Posted · Edited by Captain Magenta

    2 hours ago, markse68 said:

    Any idea how it’s position should be  relative to position of Rigel b Stu? For some reason SkySafari doesn’t show Rigel b 🤷‍♂️ Last night I was out for about 3hrs under clear skies and spent a lot of that time just staring at Sirius wishing the pup into existence but of course it stayed in hiding. Rigel b was at 12 o’clock and obvious. Relatively where should the Pup be? It wasn’t the best seeing though- I couldn’t see trap E star which I’ve seen before a few times.

     

    We were obviously mirroring each other. I too spent much time staring at Sirus last night, and for perhaps a second I imagined might've seen something, around 4 o'clock position by how I was seeing but it was an 8" newt on an EQ mount, so could've been anywhere depending on orientation of the tube I guess. It may well have been imagination. I also failed to see the E star in the Trapezium, though. I had intended to use my Mak 150 but given that it was already covered in dew before I'd even got it on to the mount, I reverted to my newt. Rigel B was easy though, as a consolation, and Castor was nice too.

    M

    • Like 2

    Baader Diamond Steeltrak from a Visual Observer’s Perspective

    in Member Equipment Reviews

    Posted · Edited by Captain Magenta

    As per the “What did the Postman bring?” thread mid December, I recently got myself a Baader Diamond Steeltrak focuser for my beloved Ireland-based 12” newt. It was a mid-December birthday present to myself. But I’d forgotten I’d added it to my ongoing present sinking-fund-style wish-list, and GCHQ got me a second one for Christmas! Rather than return it, I decided to fit it to my “practise-horse” 8” based in London! Furthermore, I also acquired an SCT-fit Diamond Steeltrak off SGL, for use on my Maks.

    So within a very short period I found myself in possession of 3 Diamond Steeltraks!

    It seems that all Steeltraks come as two main pieces: the main focuser unit itself and a mounting arrangement for whichever type of scope you’re attaching it to. In all cases the one attaches to the other very securely via a circular dovetail. You might deduce therefore that the focus-unit itself is common to all scope-types, and all that varies is the attachment adapter. But you’d be wrong. The main focuser-unit is subtly different for each of the newt, refractor and SCT versions. The depths of the securing-dovetail are different in each case, and the focus-tube itself is much longer for the refractor than for the other two.

    Most of the discussion here relates to the Newtonian version of the Diamond Steeltrak. The mounting plate which attaches to the OTA for this version is called by Baader “Versaplate”.

    Fitting it was tricky, as Versaplate’s “rough-guide” holes are not the same as the Skywatcher’s OEM fitment holes, contradicting Baader’s own installation video which uses an 8” Skywatcher as an example. Baader specifically recommends using the existing SW holes to loosely attach the plate to the tube for lining-up and new-hole marking purposes. Which is odd.

    Nonetheless the whole look and feel is of beautiful engineering. In fact it feels over-engineered, which is good because it suggests that, say, a 1kg eyepiece won’t trouble it unduly, and in the event, it doesn’t. The SW focuser looks and feels tinny and lightweight by comparison, which it is.

    For example, the Steeltrak’s actual focus-tube looks more “pipe” than “tube”, and is held in its orientation by big roller bearings. The tube is completely micro-adjustable laterally and angularly, though the instructions strongly recommend you don’t touch these adjustments unless you really know what you’re doing.

    One more thing: for the Steeltrak as supplied at the price advertised, at least for my SW 300p and 200p newts (145mm outside-tube distance of 143mm) my TeleVue eyepieces didn’t come to focus. More distance was needed. Luckily I had a 2” 47mm Baader extender which did the job. Baader’s site suggests that people often buy in addition the S58 focus-tube endpiece clamp which they say gives an extra 16mm over the standard. I’m not sure that would be enough though. In short, if you have a SW newt like my ones, you’ll need to spend extra money to allow eyepieces to get focus.

    It would also be good if they sold the Versaplate as a separate item in its own right, but it seems they don’t. They do, however, sell an alternative flat plate to fit to an existing flat base-plate. Again, odd.

    Fitting

    As per the introductory paragraph above, I’ve now fitted 3 Steeltraks: 2 to Newtonians and one to a Mak.

    The Mak fitting was trivial: it simply screwed on to the SCT “back” on my Mak. Fitting to the Newts, though, was altogether different, and involved carefully drawing out and making up drilling templates, and actually drilling new holes into my Newtonian tubes.

    The account that follows is a hybrid of my experiences fitting the Steeltrak to 2 Newts, my 12” one and my 8”.

    To begin with, I needed to separate the Steeltrak’s two pieces, the focus unit and the mounting plate, and attach the latter to the OTA. The instructions say:

    1.       Remove the old focuser, keeping aside the SW attachment bolts;

    2.       Present the Versaplate to the OTA and use the original bolts and holes to loosely hold it in place through 4 holes in the Versaplate, drilled to match SW ones (they didn’t, as discussed);

    3.       Move the Versaplate around in its looseness until it’s in the right position, tighten down a little more and mark where the proper main attachment holes require drilling;

    4.       Remove the plate and drill 4 x 5mm holes where they’ve been marked;

    5.       Attach the plate using the new holes and the special cylindrical nuts.

    However, as others have discovered before me, step 2 wasn’t that easy – the Versaplate’s holes did not match the SW ones, not even close. In the end, for the 12”, I used tape to hold the plate in place, and dotted my drilling points in situ with a Sharpie. For the 8”, later on, I went as far as to draw and cut out a cardboard drilling template (see photos at the end).

    A little thought made me realise that as long as the Versaplate’s “big hole” roughly matched the SW tube’s big hole, and as long as the “rails” of the Versaplate were flat to the OTA tube, and therefore parallel to it, it mostly didn’t really matter where the Versaplate went. Why? Because there was lots (i.e. more than 10mm) of up-and-down-the-main-tube adjustment available, and the secondary mirror could simply be rotated to accommodate any around-the-tube difference between before and after. The important thing was to ensure that each pair of new “along-the-OTA” holes was properly aligned along the main OTA, and that the alignments were the right distance apart (around the tube) to match the Versaplate. This is where Baader could make the job so much easier if they actually supplied printed drilling templates, or even just specified the circumferential distance they needed to be, for a given diameter tube. In fact the instruction booklet does contain technical engineering drawings of the units, but the only (to me) truly useful dimension, this circumference-distance, is not included in the diagram.

    For each scope, taking care, I drilled the holes, starting at 1.5mm diameter, gradually moving up to 5mm. I fitted the Versaplate, centred its main hole within the OTA hole, and tightened the 4 bolts down. But it wasn’t quite as easy as that. Again, Baader’s instructions proved simply wrong. The Versaplate comes with a pair of shims, which they say are needed only if you’re fitting it to a tube of less than 8” diameter. For my 12” scope, I didn’t need the shims. But for my 8” tube, despite being told they weren’t necessary, I found that they most certainly were, and I did use them – see the photos at the end.

    After fitting and tightening the Versaplate down, I was finally in a position to fit the focuser itself and I locked it in place with the 8 grubs. At this point, all the difficultly was over, and the sailing thereafter was plain. Mostly.

    Re-Collimation of Secondary

    Obviously the new focuser was likely in a slightly different place from the old one, so the secondary definitely needed re-collimation. I’d removed it anyway whilst drilling holes in the OTA.

    For secondary collimation I use a so-called Concenter, a sight-tube with a peep-hole at one end and a transparent disc etched with concentric circles at the other, and my process is as follows:

    1.       Attach a piece of white A4 up the OTA to illuminate the whole secondary

    2.       Place the Concenter’s sight-hole/eye at focal point

    3.       Move the secondary mirror up/down the OTA using the spider centre screw until its fore/aft position is centred in the concentric circles of the sight-tube, and roughly rotate and tilt it by hand until it’s quite round within those circles

    4.       Loosely tighten the 3 adjustment screws down to preserve the secondary in more or less that position

    5.       Remove the A4 paper to reveal the reflection of the primary – ideally it should already be quite close to centred: the 3 grubscrews should only need a tiny further adjustment to make the 3 mirror clips concentric to the Concenter’s circles.

    Unfortunately in my case, with the 12”, when I did the big “mirror-reveal”, step 5, the reflection of the primary’s mirror-clips was MILES OUT. I was confused, it should have been rather close. Using the 3 grubs I wrestled the secondary’s orientation to centre the mirror-clips’ view, but that put the secondary seriously off-round through the concentric circles. It was like “whack-a-mole”: I couldn’t get both a round secondary and a concentric set of primary mirror-clips at the same time, just one or the other. I was frustrated, and it was bed-time on day 2. It actually caused me to not sleep.

    Day 3. I decided to start more or less from scratch. I removed the focuser unit from the Versaplate, completely loosened the plate itself on the OTA, loosened all 3 secondary grubscrews and randomly screwed the spider central screw to ensure everything was in completely the wrong place.

    After tightening the Versaplate back down to where I thought it should be, using the above logic, and re-attaching the main unit, I re-traced my way through steps 1-5.

    This time, everything was perfect. The paper-removal revealed the primary mirror to be almost spot on. I replaced the Concenter with my laser and its spot was within 2-3mm of the primary’s centre doughnut. Bingo. The tiniest little tweak to the 3 grubs to perfectly centre the laser spot, and the secondary was done. Thank God. I can only think first time around I’d inadvertently got a random shim stuck under one of the corners of the Versaplate, perhaps a drillhole-burr.

    The same process on my 8” went without problems, it was more or less spot on first time around.

    Diamond Steeltrak in Use

    To begin with, for the 12”, it looked very much as though all this set up was to be in vain. With only 2 days left in Ireland, and a forecast for solid cloud until departure time, an actual account of what the focuser was like “in the field” was going to be unlikely. Or so I thought…

    Luckily, Friday 3rd Jan started as a beautiful clear morning, and it held out until after 9pm. During the afternoon I set up mounts, lined up finders, and as soon as Polaris appeared I was off.

    The whole evening’s experience, a really rewarding one in the end, was a combination of new focuser and improved collimation (as a result of fitting said focuser). And that experience was my best so far from this dark site with this (12”) scope, despite the paucity of targets and bright Moon. I think superb seeing and good transparency also helped. Only the occasional band of cloud and eventual cloud-inundation put a downer.

    I don’t have that much to say about the focuser in use, except that “it simply works”. You turn the knob. It goes there. There’s no doubt about when focus is achieved. Even just using the coarse knob is satisfying, though it could be a bit lighter-feeling for my taste. It’s much better than the single-speed OEM one, and better than the Lacerta upgrade I applied to it (though that is good, actually). On my Mak with its Diamond Steeltrak, the verdict was similar. Best focus was just as easily found despite the much narrower f/15 light-cone, albeit in daylight looking across the vista at number-plates etc. I didn’t get to use the Mak at night because cloud crept in around 9pm as I was changing OTAs to it.

    Best of all, though, is that the flexure/droop problem that I found with the OEM and other SW-based focusers on my Newts is entirely absent with this. In other words, the tall, heavy stack of tubes and paraphernalia sticking up away from the OTA stays on-axis even with my big 35mm Panoptic attached.

    If I could make one change, it would be for the fine-focus knob to be a little less low-geared, i.e. just a bit more gearing/resistance, and for the coarse focus to be a little lighter-geared, but I’m only mildly griping.

    To round off (before the photo-medley), I thought it might also be useful to qualitatively compare my experiences of the various focusers I’ve now used over the last couple of years:

    -          SW OEM single-speed (on both my 200p and 300p as I first received them)

    There’s nothing really badly wrong with the original SW single-speed focusers, with knobs that look to me like miniature Lamborghini Countach wheels. However, and this applies equally to the next two entries in this list, if you have a heavy and tall column to support outside the tube, the focuser (or the tube itself) is not strong or stiff enough to stop the whole column from tilting, sending secondary collimation to the dustbin. In my case, a 47mm Baader extension tube and a TeleVue Delos 6mm eyepiece was more than enough to cause this. It’s simply not heavy-duty enough either in its attachment to the OTA or in the build of the focus unit itself to support all this properly. Also, the amount of droop varied with the OTA’s inclination.

    -          Lacerta 1:10 upgrade to the SW OEM single-speed

    Aside from the “droop” problem mentioned above, the dual-focus upgrade definitely made for a better, finer experience of actually finding focus. “Quite nice” is how I’d describe it.

    -          SW dual speed, as fitted to their “PDS” type scopes (lent to me by a friend for a few months)

    The actual knobs are chunky and smooth in use, similar-feeling to the Lacerta-upgraded focuser, and give the whole thing a feel of being more substantial, but in reality it suffers from exactly the same unit/tube flexure column-droop as the first item in this list.

    -          TS-Optic 2” Monorail SCT focuser

    I bought this to put on the back of my SW Mak 180, and also used it briefly when I had a Mak 127. I absolutely hated it, and quickly reverted to using the Mak’s main focus-knob. The whole feel of the thing was of “softness”, including its coarse-focus knobs. Its fine focus knob was unusable, so springy and so indirect that being confident in focus proved impossible. I love adjusting mechanical things, and am good at it, but no amount of adjustment made this anything other than horrid. My final attempt to adjust it to satisfaction ended up with me actually destroying it. Good riddance.

    -          Baader Diamond Steeltrak, newt and SCT versions

    As indicated above, I find these very good indeed, it all stays stiff and in-collimation even with heavy tall loads. Focusing is very satisfying.

    -          Feathertouch, as fitted to my APM-LZOS 105/650 refractor

    I’m lucky enough to have one of these as a supposedly “best in class” comparator. Everyhting I’ve said about the Steeltrak’s “just goes there”, directness and ease-of-finding-focus applies to the Feathertouch, but the FT is that bit more excellent and a delight to use. However it’s gratifying that the Steeltraks I own don’t feel that much different from it.

    -          Moonlite

    Dunno, I didn't go into Burger King.

     

    Finally, I’ve attached a slew of pictures (in the next post below) to illustrate various points of this journey…

    If you’ve managed to read this far and stay awake, thank you.

    Cheers, Magnus

    • Like 4
    • Thanks 2

    Polar Alignment (Help Needed)

    in Getting Started Equipment Help and Advice

    Posted · Edited by Captain Magenta

    4 hours ago, volcanotop said:

    Dont bother levelling the tripod.   Get everything else set up as before.

    Get a digital  inclinometer.  (an app on your phone might do)   Stick this on the saddle and adjust to your location (53.3 degrees for me.)  

    https://www.amazon.co.uk/KKmoon-Inclinometer-Electronic-Protractor-Aluminum/dp/B07FFM6FHT/ref=sr_1_6?crid=DLV53M4YU2QP&keywords=digital+level&qid=1578930697&sprefix=digital+level%2Caps%2C179&sr=8-6

    Then when you look thru your polar scope your elevation will be bang on.   you just need to move side to side to find polaris and then make the final adjustments.

    I use this technique too. I do in fact level my mount mainly for peace of mind. I use a digital inclinometer, sometimes called a "bevel box", and zero it using a high-quality spirit level. I then slap it on to the top of my mount (the bevel-box has a magnetic base) on a place that's parallel to the RA axis. I adjust the manual elevation adjusters (NOT the RA or Dec adjusters BTW!!) until the bevel-box reads whatever my latitude is, in my case 51.4 degrees. I am then fairly confident my elevation is close to spot on. I then use the manual azimuth adjusters (again to stress, not the RA or Dec adjustments) to move the aim from side to side. The polar scope has a field of view of about 6-7 degrees, easily enough to accommodate elevation error, and easy enough to bring it into view very quickly.

    If you still can't find it, check whether anything is inadvertently blocking the polar scope - for instance does the counterweight bar recess into the mount and have a special orientation and hole to allow the polar scope to "see"?

    Good luck, Magnus

    Observing mostly 2nd Jan 2020 SQM-L 21.0 (47% Moon)

    in Observing - Reports

    Posted

    11 minutes ago, PeterW said:

    “Below”?? Changes during the night, do you mean the bent line poking out past Merope? Have to have a look, I like looking at all the little stars inside e main asterism.

    Peter

    Yes I knew I’d get picked up on that. It’s generally below whenever I look at it from where we are, and yes it’s the bent line heading straight out from Alcyone.

     

    F28E3CFF-979C-4758-9E0C-EBF80176BB5B.jpeg

    Observing mostly 2nd Jan 2020 SQM-L 21.0 (47% Moon)

    in Observing - Reports

    Posted

    40 minutes ago, PeterW said:

    Nice report!

    Where is ally’s braid, keen to find more open clusters and asterisms that I can see from the Murk of London.

    Peter

    Just below Alcyone in the Pleiades are 5 equally-spaced and similar brightness stars in a shallow symmetrical “V”. Very prominent when it’s dark. Alcyone nicknamed “Ally” I think.

    Magnus.

    Observing mostly 2nd Jan 2020 SQM-L 21.0 (47% Moon)

    in Observing - Reports

    Posted

    Observing mostly 2nd Jan 2020 SQM-L 21.0 (47% Moon)

    Christmas break near Baltimore, Ireland, for a fortnight. Christmas Eve was reasonably clear, but was my first night so I hadn’t had time or energy to set anything up. I got some photos with my DSLR plus Astrotrac and Samyang 14mm and 24mm lenses, but no “telescopage”.

    I did, however remember finally to look for @Stu’s “S”, the long trail of stars snaking their way past and through Mintaka and Alnilam in Orion’s Belt. I was using Nikon 12x50SE binoculars. Out there where there’s very little light pollution, this feature is rather prominent and just as lovely as Stu describes (by comparison, my first night after returning to SW London early this week, I looked for the same in high-Moonlit 17.something sky and it was barely noticeable even through 15x56 binoculars).

    Also, through the same optics, another of my favourite asterisms, Ally’s Braid (which I privately call the B2 Bomber) leaped out (again in London, it was barely there).

    Anyway back to the night suggested by the title. The skies finally looked good enough for me to set up just inside the New Year, 2nd Jan I think. Not ideal with the Moon up, but beggars can’t be… etc. I’d made myself a little list of targets, trying to keep away from the Moon.

    I was using my SW 300p with new Baader Steeltrak focuser fitted (more about that in a separate thread soon…).

    -          Polaris A & B. Even though this was only there as the first of my alignment stars, my view of these two was the crispest and sweetest I think I’ve ever seen through any telescope. Either the seeing was superb tonight, or this was the first time I’d really properly collimated the secondary mirror on the 12”, part and parcel of fitting the new focuser. I think a bit of both (seeing and collimation).

    -          Mu Cephei, aka Herschel’s Garnet Star. Soooo so red. Through my 8x50 finder, there was one star in the field of view SO MUCH redder than anything else! Stunning, and even more so through the scope proper. I wrote the word “wow” on my notepad.

    -          NGC 4036. I’m not sure how this random unremarkable galaxy found its way onto one of my lists, but it was definitely there when I looked for it; not much structure, unsurprising as it’s a lenticular, but nice to see it so obvious with a 50%ish Moon up.

    -          M39 & M52. Two open clusters, M39 pleasing but probably better with a wider-field view than my 1500mm FL newt. M52 was very nice though, almost like a glob. I looked at it for a while. I’d wanted to observe more globs, but I don’t think there are any looking Northish (away from the Moon) in the Messier list, and I hadn’t had time to research other NGC -list ones.

    -          NGC 7789. Caroline’s Rose. Dimmer than I was expecting, but with concentration and averted vision the rose-petal structure was evident. I blame the Moon for shouting out much of the fineness.

    -          Cloud was coming in, so I switched to alpha Geminorum, aka Castor, Pollux’s mate, and was rewarded with my best sight ever of those two, in addition to that of Polaris.

    -          Finally, wispy cloud notwithstanding, I turned to the Moon, and again I’d never seen it better. I’m in no way familiar with its detailed features or the names of any of them, but it was crisp and still. I thought, now’s the time to switch over to my Mak 180, which I’d been getting pleasure using to read number plates across the vista at 270x and 3-4 km distance and being impressed by its clarity. Unfortunately as I was unloading and reloading OTAs the clouds became un-dodgeable.

     

    Still, much better than this time last year when I saw I think one star (Betelguese) through a chance gap in clouds during the whole fortnight.

    • Like 6

    A bit of fun... design a constellation

    in The Astro Lounge

    Posted

    Isn't this basically what European explorers did to the Southern Hemisphere? The Northern constellations are largely based on Roman, Greek and older (Babylonian?) mythology. Whereas European explorers when they "discovered" the South, ignored many existing mythological or indigenous stories and instead concocted ridiculous names such as "Telescopium" Microscopium" "Horologium" "Reticulum" etc

    • Like 1

    Mercury Transit with Jet

    in Imaging Challenge #30 - Celestial Motion

    Posted

    Absolutely superb. You can guarantee that whoever was flying it will certainly know all about it. If it was me in that jet I’d have it framed and in pride of place on my wall!
     

    You’ve not just captured a brilliant image as lots do on this forum, but touched others’ lives as well - difficult to do with astronomy I’ll guess!

    Magnus.

    • Thanks 1

    Cloudy?

    in The Astro Lounge

    Posted · Edited by Captain Magenta

    Just to provide a little counter-message, I did finally get a clear-ish night last evening down here in SW Ireland, until clouds came in around 2100. Was grateful even though the Moon was up. Got to restore a bit of sanity after fitting 2 new focusers to my 300p and Mak 180 over the past 7 days.

    M

    help!!! Puzzled????

    in The Astro Lounge

    Posted

    2 minutes ago, barkis said:

    Is there not a world governing body existing to veto this madness?
    Ron.

    Not yet.

    It’ll be the same governing body that will, in 50 or so years time or less but too late nonetheless , rightly condemn the current crop of politicians as criminally negligent for not treating the current climate crises as a cross-party national (nay planetary & existential) emergency more serious than world war.

    It’s as if an asteroid were heading towards us but party politics is more important. In 30-40 years much of central London and Florida to name but two will be under water.

    Yours, totally helpless like the rest of us...

    M

    Collimation question

    in Discussions - Scopes / Whole setups

    Posted · Edited by Captain Magenta

    17 minutes ago, blinky said:

    I was about to hit the buy button but then thought, is It just that I need to get the crosshairs of the Cheshire cantered on the primary mirror spot?

    In theory yes, but for me at least the crosshairs are so out of focus there's lots of room for error. You also need to ensure the secondary appears circular by dividing the secondary into 4 equal "pie slices" using the (fuzzy) crosshairs.

    Both tasks are much, much easier to do using the aforementioned Concenter: I have one and it makes it all so much easier. See this view of my secondary through the Concenter peephole:

    IMG_6099.thumb.jpg.c2c3f8d3d2031a0f835a71dda2b0aa25.jpg

     

    Cheers, Magnus

    Azimuth Adjustment Knobs - AZEQ6 GT.

    in Discussions - Mounts

    Posted

    It must be something about Ireland. I did exactly the same to mine (in Baltimore) when fairly new, I put it onto the tripod head, and promptly forgot to clamp it from underneath. I half caught it (very stupid thing for me to attempt, luckily no injury) and the azimuth locking-bolt and dovetail-clamp bolts absorbed all the energy, thanks be. They were standard M-something bolts, easily found. Works perfectly, hopefully so does yours...

    Magnus

    • Thanks 1
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.