-
Posts
462 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by tony69
-
-
1 hour ago, CraigT82 said:
ok got that now thank you and I only took single shots until I get use to how it works and no idea how to stack images at moment its all new to me have googled a lot but not as helpful as asking those that know so thank you
-
1 hour ago, Cornelius Varley said:
The images do look a little out of focus. Are they single images or stacked videos ? If you capture using Sharpcap the zoom function is on the top menu bar.
single images at moment until I understand it better
thank you
-
17 minutes ago, PeterCPC said:
Looks out of focus to me.
Peter
this was my question was clear on screen until I captured image then did not look so good also how do I zoom in to preview please and scope was set up about an hour before viewing
thank you for helping me
-
-
9 hours ago, happy-kat said:
If you are using windows 10 you could check your privacy settings on the camera, I have found w10 had blocked my webcam and had to change privacy before sharpcap could show the image.
ok thank you will check
-
1 hour ago, CraigT82 said:
You will need to adjust the exposure setting, should be a slider. In the daytime the exposure will need to be very short, just a few milliseconds. The gain slider should also be set to low as well. Sorry I'm not familiar with sharpcap so dont know where these settings are.
If at night you will want to be pointing at the moon as it's hard to miss! Might need 10 or 20 milliseconds on that.
thanks you so much for your help will give it a try next time I am home
-
2 minutes ago, CraigT82 said:
Leave the Barlow off for now, see if you can get it focused without
thank you and last question should the image just appear on screen once it focuses or do I need to change settings thank you
-
3 minutes ago, Cornelius Varley said:
You probably need to adjust the focusing. The yellow/green colour shows that the camera is working but the telescope is out of focus.
ok will give it a go is it ok to leave 2x barlow attached thank you
-
8 minutes ago, CraigT82 said:
What are you pointing the scope at whilst using the camera? Is this in the day ot at night? The changing light levels on the screen show it's working ok. I'd probably test it without the Barlow first if you can? Point the scope at a far off tree or spire using an eyepiece first then gently switch out the ep for the camera and refocus
good evening I have tried this all ok until I attached camera then it just showed yellow/green screen do I need to change any settings on pc or should image just appear thank you for help
-
good evening iam looking for help setting up my BRESSER Full HD Deep-Sky Camera to my skywatcher 150pl have attached a 2 x barlow and attached to telescope and set up sharpcap software but only seem to be getting yellow and green screen that does change colour if I point in different direction and it has lines through it but no image displayed have read many hints and tips and watched videos but still no luck can anyone advice please
many thanks tony
-
have down loaded that but same problem this is all new to me just need some help setting it up be good if it was auto focus what settings do I use please
-
good evening bought myself this camera for my skywatcher 150pl anyone else got one if so do you know how to set it up and how to use toupsky as read manual inside out but still cant get it to work any help please my main use will be moon photography so need to know settings if possible please
BRESSER Full HD Deep-Sky Camera & Guider 1.25
-
only ever done that once realy hard to capture
- 1
-
took me ages to get the settings right but some times they don't work just trial and error
thank you for your comment
- 1
-
its a sky watcher one so hopefully it works thank you
-
sorry yes eye pieces I have a 2x barlow will that be ok
-
-
good morning
I have loads of lenses etc just wondering if they can be put on camera please?
-
need some advice please
anyone know if you can fit lens to front of this before inserting in to telescope to make images closer ?
many thank tony
-
thankyou for this my laptop also has serial port will it be better to use usb ,
will the stellarium programe help me find planets ect by cicking on them?
-
sorry it comes with eq3.2 pro synscan
-
good evening hope you dont mind me jumping in after reading this thread i have a question iam getting a s/w 150pl goto can you tell me what leads i would need to conect to my laptop please .
imaging
in Getting Started With Imaging
Posted
ok will give that a try thank you very much