power supply

[Cat3mechc]

Hi

Ive put the Celestron Nexstar 8SE inability to sus Hand controller on the back burner 4 now ,

Exchanging it for a Celestron CPC 800 XLT, GPS it has same controller, yes I know ! Ha sort it later

Right, question is power supply ,I think it calls for a (Stable 12v dc 1.5 amp regulated supply)

I have a nearly new hardly used (my old CB) Unit that may do the job ?

Ive measured the (regulated supply)

It gives reading 13.3 v @ 5-7 Amp

1.3 volts over the 12v but if I ran the Scope via the 12V socket in my Volvo it would probably read 13v as well

What do you think 12v nothing but 12v

or would 13.3v unit be ok ?

Take Care (Alonso)

[MarkF]

Wait for others to confirm, but I am sure a fully charged 12v battery kicks out 13.8v.

[Psychobilly]

Scope (CPC800) runs fine from 13.8V...

Peter...

[Steve C]

Should be absolutely fine