3D printed tube clamp for Sharpstar 50EDPH

[orly_andico]

I recently got one of these scopes from a fellow member, and the dovetail shoe was wiggling a bit, due to the well-known too-shallow M4 threads.

So I made up a 3D printed tube clamp out of PETG which feels much more stable. It can be improved (e.g. put a notch for the rotator thumbscrew so it covers the entire back end of the OTA) but it took 7 hours to print and this works fine for me.

https://www.thingiverse.com/thing:6691070