Technosky Elle alt/az mod

[rowan46]

I am putting setting circles on the mount. just thought how I would show anybody who was interested how easy it is. cost nothing no mount cutting /drilling involved 2 pipe clamps (lockable type)hold the pan handle (eq1 mount leg) with thumb screws to hold it in. They also double as a clamp to hold the digital level (make sure it is seated on both bolts (m6x 40mm).

The pointer is another pipe clamp (open type) with a bit of cut off cable tie stuck on the end. Setting circle printed off http://settingcircle...cmd=home_screen for free and then laminated, although if you pay a small amount it can be configured for any size or colour circle you need. just need a bubble level for the azimuth knob

http://www.ebay.co.u...=item3a81dea217and a light to see the readings

http://www.amazon.co...n reading light this is the same light as the one I am getting for 1.99 inc postage its on amazon somewhere. a bit of nail varnish and good to go