dzaster Posted January 17, 2012 Share Posted January 17, 2012 Ok probably a daft question but a m struggling hereI have a Celestron AstroMaster 130 (just purchased) with an EQ3 mount. Followed the instructions regarding setting up and setting it to polar alignment and beleive this is done correctly. However I am unable to see anything where it should be according to the spotting scope.Can anyone give me an idea on how to set this up? Link to comment Share on other sites More sharing options...
astronymonkey Posted January 17, 2012 Share Posted January 17, 2012 Hi ,have a look at this video to see if you have it all set up correctly then let us all now if there is anything you dont understand. cheers Link to comment Share on other sites More sharing options...
cabby Posted January 17, 2012 Share Posted January 17, 2012 Hi and welcome to the forum.I have the same scope as you and found out pretty quickly that the finder was next to uselss.I got so frustrated trying to use it I nearly gave it all up, why the scope companys put on a piece of equipment that is so rubbish I cannot understand!!I bought myself a Telrad which looks huge but you get used to it. Once set up the difference is amazing, I just get what I want to view in the centre circle and I'm away.By far this is the best bit of kit I have bought that makes stargazing a real joy. Link to comment Share on other sites More sharing options...
dzaster Posted January 18, 2012 Author Share Posted January 18, 2012 Hi Guys thanks for this, will try setting it u again as per the videoHopefully skies will be clear tongiht so I an see something I want to rather than just panning around dz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.