wrinkly Posted July 31, 2011 Share Posted July 31, 2011 After doing the usual blacking on the lens edge and touching up any non black bits on the inside of the tube of the ST80, looked in the lens and there was some form of circular reflection from the eyepiece end. Investigation showed it to be the chromed end nosepieces of the diagonal or the eyepiece.Why do they chromium plate these bits, just for looks? Link to comment Share on other sites More sharing options...
Earl Posted July 31, 2011 Share Posted July 31, 2011 Its probably cheaper than anodising them black. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.