Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

SPC880 issues


Recommended Posts

Not so much a question about imaging per se but I've recently bought an SPC880 (flashed to 900) with the adapter etc. Fairly sure I'm missing something really obvious but how do you attach this to the scope over an eyepiece? I have a Nexstar 130SLT so obviously don't want to hold the camera against the EP as I'm fairly sure this is going to cause the image to shake a fair whack. Any hints/tips?

Link to comment
Share on other sites

You don't use it in conjunction with an eyepiece. You use the adaptor to replace the eyepiece with the camera :D

You can use an EP if you really want to with an eyepiece projection adaptor, but you don't normally see it done that way.

The camera will operate in the same sort of way as a 6mm eyepiece so you already get a "magnified" image on the screen.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.