Stargazer32584
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Everything posted by Stargazer32584
-
Hi Wim, i think, i will transfer to the Arduino IDE. That's my "home" that i usually use for the development. The weather watcher driver parse only the data from the html-file. Is it right ? Thanks a lot ! André
-
Okay...! The greatest problems are sitting in front of the computer. I overlooked to declare the right pins. The pins in the original are the 5 and 4. I changed it to 21 and 22. So, i restart the whole thing with the following result: ('192.168.178.122', '255.255.255.0', '192.168.178.1', '192.168.178.1') Warning: I2C(-1, ...) is deprecated, use SoftI2C(...) instead Traceback (most recent call last): File "main.py", line 9, in <module> File "mlx90614.py", line 37, in __init__ OSError: [Errno 19] ENODEV MicroPython v1.14 on 2021-02-02; ESP32 module with ESP32 Type "help()" for more information. >>> What can i do ? Best regards André
-
Hi, in the evening, i had the chance to test it with the both sensors. With the following result: ('192.168.178.122', '255.255.255.0', '192.168.178.1', '192.168.178.1') Warning: I2C(-1, ...) is deprecated, use SoftI2C(...) instead Traceback (most recent call last): File "main.py", line 68, in <module> File "main.py", line 36, in DewPoint ValueError: math domain error MicroPython v1.14 on 2021-02-02; ESP32 module with ESP32 Type "help()" for more information. Can i ignore the warning ? And a problem with the calculation of the dewpoint. Best regards André
-
Yes, everything is done with the boot.py. There are the parameters of our network signed in. Tomorrow, i will test it with the sensors. Thank you and after the test, i will report the result here. André
-
Hi Wim, thank you for testing it ! I take the binary from your screenshot for the Firmware of the esp32, the esp32-idf4-20210202-v1.14.bin. Make the fileupload with thonny. Now, it seems to be easier than before. Now, he make the connection to the wifi-network and give me the whole adress of the controller. But if i go to the adress with the browser, there is no index.html. I uploaded the index.html to the controller. Is this right ? The worlds between the Arduino IDE and micropython are greater that i thought. Thanks a lot.. André
-
Hi Wim, i tried to install the micropython - firmware with uPyCraft and with "flash downlaod tool". Then upload your files. Both ways have the same errors like before. Tried also an other ESP32 Module (ESP32 Mini D1 - Boards). The same. So i flash the mp - firmware on the ESP. I take uPyCraft for this step. After the flash, the device have the "boot.py" as a part of the system - files on board. I upload the "blink.py" from the examples. I load the file up to the microcontroller. The i run the file and blue led is blinking. But your code doesn't work. That's all very strange... Best regards and thank you for your support... André
-
Hi Wim, thank you for your fast reply. I checked the mails, but can't find your mail. It should be at: Stargazer32584@googlemail.com Best regards André
-
Hi Wim, i have a problem, uploading your files on the ESP32 - Board. I prepared the ESP32 with uPyCraft V1.1 and the firmware for micropython. Then, i opend Thonny and connect to the device. He show me the "boot.py" - file on the device. After this step, i make a right click on the "BME280.py", the "mlx90614.py" and the "main.py" and upload it to the device. But, if i want to upload your "boot.py" - file, the controler don't react. When i start uPyCraft again and connect to the controler, he want to install the firmware for micropython again. I haven't any idea to fix the problem... . I know only the Arduino IDE for programing. Thanks a lot ! Best regards André