Simon_02

I d probably do the same thing, but the mount doesn't turn on at all, not rly sure what happened as i didn't change anything in voltage or power settings

Ok so now I've got another problem. I tried downloading new firmware and once I connected it to my computer via wi fi it just stopped working and won't turn back on. It happened while I was uploading the firmware. Anyone had such an issue before?

Once again thank you all for replies. Unfortunately, I did a hard reset and I still can't get it to turn. Both app and sidereal mode don't seem to work. Not really sure whether I am doing something very badly or whether there's something wrong with my tracker.

Thank you for the response, I am using an intervalometer, I am using a 14mm samyang lense and the switch is set to N. Also I power it through batteries, but I changed them to new ones and that's not it apparently. I ll try the hard reset and see how it goes

Yes I can

Hi everyone, I had recently bought a Sky Adventurer 2i and now finally tried it out. Unfortunately tracking in sidereal mode (built in, not via app) doesn't seem to be working. I noticed severe trails at long exposure times and no movement of the ground with wide lense ( which I suppose should look blurred since I am following stars). Initially I thought I just did a poor job at polar aligning it, but I tested it during the day and it just doesn't rotate. I have no idea what may be wrong. The motor itself works, because it rotates in manual mode. I'd be so glad if you could give me any advice.