Brad A

Thanks Mark I have the Celestron 8" CPC Deluxe HD series fitted with the StarSense auto align. The 10 step is carried out only once on the initial install of StarSense to correlate with the scope tube and eyepiece. I have carried this out numerous times purely hoping each time that the scope will track. I have checked and I believe that the Sidereal settings are right. I am just at a loss, all motors etc works perfectly. Power source is fine, I even bought a new power cord from Celestron just in case it was maybe the cause. As I said the Telescope does everything perfectly but does not track the target object. Mark it does not move the motors at all. It picks up my location and the time/date perfectly. As I said it goes directly to the target but no auto movement afterwards. 🤔

Thanks John, no Wi-Fi is perfect, I get the feeling that I have to go into the StarSense hand controller and activate "tracking" or something like that but everything works and operates perfectly except the scope does NOT keep the target in the eyepiece recticle. Appreciate your assistance.

Thanks John, no Wi-Fi is perfect, I get the feeling that I have to go into the StarSense hand controller and activate "tracking" or something like that but everything works and operates perfectly except the scope does NOT keep the target in the eyepiece recticle. Appreciate your assistance.

I am having a problem that I set the telescope up, the scope picks up the time and location perfectly, the StarSense runs through its routine and successfuly aligns, I do my 10 object alignment to assist with tracking, I enter a object let's say Saturn at the moment and the telescope slues to the selected object just fine but doesn't track. I have a alt-z Mont so no need for Polar alignment. Thanks in advance. I use either the SkyPortal App or SkySafari 6 Plus App.