Philip601
Members-
Posts
21 -
Joined
-
Last visited
Reputation
1 NeutralRecent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
Hi I seem to have lost the original optec serial to usb cable for the Focuser Boss11 (I believe its named RJ12 to USB) I have tried First Light Optics and its something they do not stock, and they would have to contact Starlight Instruments and unfortunately it could be up to 2 months waiting time. Does anyone know where to seek one of these cables I have seen this but not sure if its suitable https://www.amazon.co.uk/USB-RJ12-Converter-APC-940-0144/dp/B07W6JPTKB I hope someone can help please thanks Philip
-
thx for reply . I do have the mount power cable. The problem is attaching it to the power supply, as the power supply hasnt a cigar socket . All that is on the PSU is a red+ and black-. There are no sockets . I was needing to know what would be required to plug my mount power cable in to the PSU when there are no cigar sockets available thx Philip
-
I am just starting back up with astronomy and i have AZ-EQ6PRO. How do i connect the mount to the regulated power supply block. The power cable from the mount need to connect in to a cigar lighter socket which is not provided for on the power unit. Can someone point me to an adapter with a cigar socket that connects to the power supply block, and how is this adapter connected to the power supply block. A simple question i am sure.I hope someone can help thanks Philip
-
thanks for the info. ps align pro sounds the best bet Its very difficult for me to line up at night because of trees alla round and specially hiding polaris. I do have a gap in the trees for a couple of hours of full sun thats why i have given up astrophotography at night and going in to solar imaging etc philip ps where on the mount do you put your phone I have just found out that app is not on my android phone. Does anyone use a different app There is an app on my android phone Polar Aligner Pro which looks similar to the ps align pro.. but there is a review on there that it is not as good as the IOS version.. Anyone use it for daytime alignment
-
Stellarium 0.20 Telescope control (No sync option?)
Philip601 replied to Vega's topic in Discussions - Software
I have had the same trouble so reverted back to Starry Night Pro. Straightforward connection and easy to slew, sync or cancel Philip -
stellarium 0.20.1 telescope control
Philip601 replied to Philip601's topic in Discussions - Software
I have found using telescope control in Stellarium so difficult i have now gone back to Starry Night Pro. I thought i might as well pay for the upgrade version8 . Everything was so easy and connecting to my mount with little assistance from me. Stellarium versus Starry Night Pro is an easy decision for me. Philip -
stellarium 0.20.1 telescope control
Philip601 replied to Philip601's topic in Discussions - Software
Hi I am stuck again. I restarted Stellarium and I am now back to the message Connect Error:Port not available when tyring to connect thru Stellarium This is getting very confusing Is there anyone getting to run the telescope control thru ascom using Stellarium 0.20.1 UPDATE i have restarted computer went thru same procedure as before and now once again can connect to the mount through Stellarium but still cannot find away to stop a slew and a way of using keyboard to control mount Philip -
stellarium 0.20.1 telescope control
Philip601 replied to Philip601's topic in Discussions - Software
Hi another update I tried in the EQASCOM Toolbox to not click on Ascom connect and this seemed to have solved the problem and i can now use the telescope control in Stellarium but now I have a configuration in Telescopes 1.Connected local ASCOM New Telescope1 I can now use in the 'Slew telescopes to' box the Slew command and that works ok. I have also the Sync command I dont know how to stop in the middle of the slew and the ctr1, ctrl3 and ctrl4 do not work on keyboard. I presume they only worked with StellariumScope any help -
stellarium 0.20.1 telescope control
Philip601 replied to Philip601's topic in Discussions - Software
I tried again this time adifferent problem Using Eqmod alone everything works fine Started Stellarium In Add New Telescope i used ASCOM Then in Choose ASCOM telescope and in the little box i entered EQMOD ASCOM HEQ5/6 clicked on Properties and you get the EQMOD ASCOM SETUP box Mount Options was on Auto Detec. I then clicked OK I then go back to TELESCOPES box and the status reads '1.Disconnected local,ASCOM New Telescope1 So i the click on connect the eqmod box now changed to Connect Error: Port Not Availanle I used in the past Starry Nights and didnt have this problem any more suggestions please Philip PS i then close Stellarium and the EQMOD box everything works perfectly. For some reason i cant get Stellarium to work with EQMOD -
stellarium 0.20.1 telescope control
Philip601 replied to Philip601's topic in Discussions - Software
Ok I did all that and some improvement In the Configure telescope box i now have 1.Connected local, ASCOM Scope 3.Connecting local, external Sync 5.Connecting local,external Cancel but 3. and 5. do not connect I can slew in stellarium but whats happening to 3. and 5. Philip -
Hi I have just started back in to astronomy after a break. I have stellarium 0.20.1 and i understand that with this new version you do not require the stellariumscope software to control the scope, as this new version supports telescope control. I have the latest ascom software control and using the eqmod software alone i can give commands to my mount perfectly. I then started stellarium and selected the telescope icon at the bottom of screen and the box opened up with the message 'There are no active devices' so i selected configure telescopes. The next box was Telescopes so i clicked on Add. In the Add New Telescope i selected ASCOM in the next box the status was 'Disconnected local, ASCOM New Telescope 1' . I then selected Connect and all i see is 'Connecting local ,ASCOM New Telescope1' . And thats it,,it doesnt connect. Can anyone help on that one please Philip