smez
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by smez
-
-
Considered a RASA but chose the Edge for the different focal length possibilities
-
I stretched it in pixinsight
-
-
Thanks Olly as soon as I can get out again I will handle the image differently
-
Elp I have v4 and do not use a dew shield currently, I am going to try to rotate the camera to see if that helps with the banding as well.
-
This was a 10 sec exposure. I tried anywhere from gain 120 to 0, bin 1 and bin 2. It is like I see the optical tube and then a shadow of it below it and then black around the corners. I attached the original image and will take another tonight if it doesnt rain with just a screen shot
Edgehd
asi2600mc
hyperstar w / filter drawer
and I am using a primalucelab esatto 2
-
-
Dave thanks for the help, I feel stupid now... tonight was good and the difference was the wind was a little harder last night. Not sure but that is my guess
- 1
-
i am using an ioptron cem25p and have a handheld device for the shutter
-
I was trying it out just a few minutes ago and can focus long way and even as close as 25 feet, so I wonder if maybe it's a setting on the camera? In manual mode and was using bulb and iso 800
-
It's not even close... so I am curious if I put on the prism and try and use a barlow attached to the camera.
-
Yes that is correct.
-
I just have the camera connected to the scope and could not get the stars into focus. Cant get a picture right now. I am using the Canon adapter, Canon camera connected to the back of the scope.
-
I am new to using the WO RC51 and tried to focus in on Orion and was not able to get close using just the scope and my Canon dlsr, what am I missing here?
-
11 hours ago, happy-kat said:
Hi
The camera does the screen work in the day time as you would expect?
I've found only really bright stars like Rigel would show on the camera screen so I connect my T3 to an Android phone and use DSLR Controller makes detection and focus so much easier.
Yes it works as expected during the day.
-
I have a canon 3ti that I have modified. I am new to using a moded camera but cannot seem to find any stars on the display screen, my settings are WB set to daylight and the iso varies. Currently not connected to a scope so just using a tripod for now but all I get is a blank screen and it does not matter what lense I have on it. Any help or advice is appreciated.
Hyperstar issue
in Imaging - Discussion
Posted
When I received mine it was loose and I had read to tighten all the way down to start with, then I had to adjust tilt which helped with stars but the results of all my previews were the same. I do have some material I can use for shims and will try that tonight. Also want to make sure about back focus which I believe is 39.8 mm. Not looking for perfection by any means that would make you mad for sure.