-
Posts
202 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by Vic&Al
-
-
-
-
Hi all,
after going back to the drawing board and reprocessing, reducing the number of calibration frames used seemed to give better results.
Hopefully I have not overdone it with the data I have
121 Lights 40" iso 800 Just over an hour of useable
20 x Dk's 20 x Ft's 20 x Bias with EOD 50d & WO 72.
It's hard to exit the processing 'tweak loop' I keep falling back into!
Thanks to Taman, Olly & Astrobackyard for the tips 😉
- 4
-
On 27/11/2022 at 11:38, Taman said:
Hi Vic & Al
Strangely enough I used Siril to stack some Canon EOS images this morning. The error you're seeing is the default Siril Bayer pattern is probably set to RGGB and the Bayer pattern for your Canon is GRBG. This should not matter as Siril will override the default and use the pattern it finds in the Raw file header.
A couple of questions:
Are you using the built in OSC script to process?
If so, have you got the folder names set up correctly, i.e lights, darks, flats, biases and set the home directory to where these folders are located?
The files you uploaded look fine, could you also upload the stacked result?
Thanks
Tony.
Thanks for the reply
(Tony) I went back and reviewed all the files and found a couple of rogue flats with different iso/exposures,
also started from scratch, built a new directory and run the OSC script to process
and I think we may have cracked it, some annoying dust bunnies have survived though
I have uploaded the resulting TIFF & it looks a lot better I think there is some galaxy in there, thank you so much (Just need to learn how to process now )
(Olly) I will give it a try without the darks and see how that turns out, so much advice out there and some contradictory
I guess every setup is different. I decided on 80 darks and in the end had a run of 160 lights of which 121 were usable this ratio does however seem excessive to me.
Maybe next time I'll just using a few darks at the start of the session and a few from the end when the sensor is up to temp?
Or would you advise against the darks altogether?
Regards
Alex
-
Im using Siril for the 1st time and when I use my calibration frames the resulting final image is unusable (stacked without darks/lights/flats the data is there)
I am getting an error in the Siril console (Bayer pattern in header different from settings)
Using Canon 50d, Capturing with APT and Siril for the processing.
80 X Darks 40" iso 800
50 x Bias 1/8000 iso 1600
28 x Flats 1/250 iso 800
121 x Lights 40" iso 800
I think I got it all right and hoping its just an issue with my processingB_M31_1430_ISO1600___22C.CR2
Thanks in advance for any advice...
L_M31_1518_ISO800_40s__12C.CR2 D_M31_1512_ISO800_40s__22C.CR2 F_M31_1466_ISO800_1-250s__26C.CR2 B_M31_1423_ISO1600___22C.CR2
-
Nice capture, and really nice processing very natural looking clouds well done!
- 1
-
Beautifully processed image, love the cloud detail. That's a lot of data for under 2 hrs!
- 1
-
So I've been out of imaging for quite a few years and the gear/software has changed considerably.
I got the old rig out of storage and put it back together with a few upgrades, since I did it has obviously been cloudy :o/
Anyway here's my effort, just over an hour of 40sec subs, from the 50d & WO Meg72 stacked and just a quick stretch in Siril
no bias, darks of flats although I did do them but they destroy the image in pre-processing for some reason not sure what I'm doing/done wrong yet
- 3
-
I am looking for a power supply for an Canon EOS 50d from a Primaluce Labs Eagle 3 but my supplier says they are discontinued
I am fairly competent with a bit of basic wiring, but not anything involving too much of the black magic
The eagle has a couple of spare 12v 3 amp & I have an old AC cannon adapter (7.8v 2amps) which I could scavenge from.
any help would be appreciated
Thanks in advance
-
Quick update
Still no break in the weather (sorry) but have managed to refine the setup,
so I can remove the scope etc from the mount with fewer cables to unplug (much less waddling)
also cleaned up the cables after the cable police gave me a ticket ;o)
2hr clear sky window forecast for Friday, fingers crossed....
- 2
-
It was a pick up and waddle out last night but will have to refine a partial strip down in future.
Cloud and wind again stopped play last night, did manage my flats, bias and darks though!
-
So,
been out the imaging side of the hobby for a few years, but wifey bought me an eagle for my birthday and as we have finally moved to a bortal 2-3 area should give it another go.
Not had a clear night since!
A lot has changed in a few years regarding kit and software so Ive put this rig together and hopefully got everything to make friends,
so fingers crossed I'm planning a go at M31 tonight might get a couple of hours!
- 5
-
That is a stunning image, reminds me of the HST deep field.
- 1
-
Sad news indeed, what an inspiration he will be missed.
You have the best view of all now Sir Patrick
-
Same with me. Bought a cheap scope to see how much interest it would give. A fuzzy little image of Saturn with its rings, some reasonable moon pics and sun spots, encouraged me to spend an exorbitant amount of a posh mount. Also all the enthusiasm and encouragement from members here helped immensely
I found carting gear outdoors, setting it all up and getting frozen even before I started, followed by bringing it all indoors afterwards, rather a pain and a bit discouraging. Crawling around on the ground with one eye to an awkwardly placed polar scope was far from ideal!! So I decided I wanted an observatory. I think if I knew what I know now I might not have started. It's an immense project though very interesting. Or at least I might not have been so ambitious - but that's me, I go over the top It's the biggest project I've ever tackled! But I'm not giving up!
It will be worth it!
Thanks Elin....
in Discussions - Scopes / Whole setups
Posted
Thanks for the comments, on inspection the scope has took the brunt by the looks. Focuser has snapped off, tube is dented, finder is knackered and primary mirror has shifted. Mount is soaked and few loose fittings hopefully it will start up when its fully dried off.
No garden ornaments were harmed lol..