BrendanC

Hi all, I know, I know, this has been discussed before but having been through a bazillion threads, here and on other forums, I'm still clueless as to what I need to do here. I've got a Skywatcher 130p AZ GOTO scope and mount, and recently got a Canon 1000D, astro modded. I've managed to connect the camera to the scope using Skywatcher's clever eyepiece adapter plus a T-ring adapter for the camera. All good. However, I cannot focus on the moon. At all. I know this is because reflectors have limited in-focus range, and it seems to be that it's about to get into focus as the focuser goes in, then stops. So, not enough travel. I understand the problem, and I know plenty other folk have had this in the past, and I think the answer is eyepiece projection or inserting a Barlow. I've played around with every bit of kit that came with the scope and cannot figure out for the life of me how I'd get the Barlow inserted. So, I either need an adapter of some sort for eyepiece projection , or to get the Barlow into the optical path. Can someone please tell me exactly what I need here? An actual link to an actual product would be most appreciated. I totally understand that really, the camera plus scope combo would be better for deeper sky objects, and I'm not trying to get 'the whole moon' in the image (happy with mosaics). I just want to be able to focus on the moon. Any/all advice appreciated. As I said, I'm sure the knowledgeable around here will be rolling their eyes because this must have been asked plenty of times before, but despite reading up on this I just do not know what I should be buying to get around the problem. Thanks Brendan

Outstanding. Thanks all. I love it when I'm told it's something I don't need to worry about. And I think I'd missed the bit about it being just for EQ mounts, so I think I actually understand it with respect to EQ and not AZ. What a relief. Toothache gone.

Thought I would tie this one off - I finally sorted it. I noticed that Sharpcap recognised my mount via the Ascom drivers, so I can control it exactly as I want from within Sharpcap. Get aligned manually, centre the image on the viewfinder, then I can fine-tune and centre on the computer screen. All controls work fine, only bugbear is that if I turn tracking off, it turns it back on a few seconds later for some reason. So, out with alternative drivers, EQMOD and even the ASCOMPAD, it really is just a case of installing the ASCOM platform and the ASCOM Skywatcher drivers. Which it should have been to begin with, but wasn't.

Hi all, So, when I first bought my scope (Sky-Watcher Explorer 130P SynScan AZ GOTO) the nice lady in the shop told me that, to align it, I should choose two-star alignment. Several months later I'm all fine with that. I often find that daytime alignment with Saturn or Jupiter just as it's going dark tends to be sufficient for quick viewing, but I have used two-star and it all works well. However, polar alignment has always bothered me. I keep coming across it. It isn't available as an option in my Synscan. I've read plenty about it, but really, just do not understand why it's necessary. Sorry, I'm sure this has been asked before many, many times, but it's just not making sense to me. So my two questions are: 1. Why is polar alignment necessary if, say, you can align yourself with two (or even three) stars? If someone could answer this in, say, fewer than 50 simple words that would be great. 2. Furthermore, even if it's necessary for a manual mount., it is necessary if you're using a mount that tracks automagically like mine? That's all. Again, apologies if this is numbingly familiar to you all but it's something that bothers me, a bit like vague toothache that you know you should do something about sooner or later. Thanks, Brendan.

Decided to leave this one on ice for now. Seriously considering just getting around the problem by using the StarWatcher app instead, which means either updating the handheld hardware or buying the wifi upgrade.

Yep. I'm only checking out EQMOD because I can't get the other approaches to work! I'd be happy not using it. All I want is to align outside, go inside, use planetarium software to find objects, and then have some sort of software keypad to fine-tune an object to the centre of the camera. Whatever I use just doesn't quite work as I want it. Any/all advice appreciated!

... and now I've sort of got EQMOD to work, but I keep getting the dreaded timeout message when connecting to the COM port. All drivers updated, several uninstalls and reinstalls. This is driving me bonkers. I'm going to give up for a bit.

Thanks, I'm using v6.0.6262.15273, which seems to be the latest on https://skywatcher.com/download/software/ascom-driver/ and https://ascom-standards.org/Downloads/ScopeDrivers.htm I downloaded and installed your drivers and selected NexStar 5I. I can connect it in CdC but the software hand control does not appear at all. Another new discovery: if I just switch on the mount and don't go through alignment, up/down works perfectly, even with tracking turned on in CdC. If I do set it up, I'm back to the weird up/down thing again. This could tally with the idea that there's some sort of conflict between the scope being locked onto something, and the manual up/down setting. Thanks for the suggestion though, really appreciate it. I might play around with other drivers to see if I get anywhere.

... and after more fiddling, this is the situation: * ASCOMPAD open only (ie no astro software): west/east software hand control works, north/south does the strange crawling thing. Click Stop on ASCOMPAD's keypad, and north/south work fine. Is this an ASCOM conflict? * In CdC: if I open ASCOMPAD before connecting in CdC, north/south behaves exactly as above on the software hand control. If I then close ASCOMPAD and connect in CdC, north/south don't work unless I turn off tracking. They then work, but tracking is immediately switched on again! Is this a tracking conflict? * In Stellarium, while the scope is connected, ASCOMPAD is grayed out, which strongly implies Stellarium controls the scope while ASCOM cannot. If I disconnect it, ASCOMPAD behaves as above. So there seems to be something conflicting with the north/south software hand control which might be due to ASCOM, or might be something to do with tracking. If anyone has experienced anything like this it would be great if you could let me know your thoughts. I realise this has been a bit of a whine and I've been posting while investigating, so no worries if not. I think I'll give up for a bit, have a cup of tea and cherry tart, then think about this some more later. Main thing is, it seems I did have things set up properly first time around because after an entire morning with this, and after being careful to try and understand what I'm doing, I'm back to where I started!

OK, bit more diagnostic/fiddling/scratching of head. Situation is this: * In CdC, the software handset control (ie as distinct from the Synscan hardware unit) lets me go west and east full pelt * HOWEVER, when I click north or south, I just discovered, it IS actually slewing the mount - but always very very slowly, always down, always for about five seconds then stops. * I installed ASCOMPAD to see if I could get back to where I was before. I can: if I run ASCOMPAD, none of the controls on ASCOMPAD work. However, when I click 'Stop' in the middle of ASCOMPAD's keypad, the other software handset control works perfectly. * If I then go back into CdC and reconnect the scope, the north/south works once or maybe twice, then goes back to the strange crawling-south-for-five-seconds mode. I should add that this is completely replicated with both my USB/serial converters ie the cheapo one I first bought, then the SkyWatcher official one that cost about five times as much in the hope this would fix it, which it hasn't. So I don't know why north/south is doing this on the software handset control when in CdC. Any ideas? Any/all suggestions welcome.

Thanks, that's exactly the point I'm up to. The small handset control is appearing, and it controls the mount when I click west and east, but not north and south. Also, whereas CdC shows where the scope is pointing, if I select a target object and click Slew, it doesn't slew. I've run the ASCOM diagnostics, it says there are some fails but I do not understand the log files. I'm going to try Stellarium again but I have a strong feeling I'll be back where I started ie with the small ASCOM handset working with west/east but not north/south.

So I figured out why I got an error message when registering the mount with EQMOD - I had to run the toolbox with admin rights in Windows 10. So I'm back to how I was before. I'm running Cartes du Ciel this time, because it seems to loom large in most people's instructions, have connected up the scope, and the funky little hand control is back. I can go east/west, and for a few seconds just now the north/south worked too, but it's stopped again. If this worked, it would be exactly what I want. I'm starting to wonder whether there's a problem with my scope. The handset controls work fine, but north/south does not work on the hand control. Any ideas?

Hi all, So, I'm trying to get to grips with connecting up my laptop to my SkyWatcher 130p Synscan GoTo mount. This is probably a familiar story to many of you. A few months ago I got it working quickly and easily with Stellarium, just use the plugin and slew to object. However, I couldn't work out how to have a simple 'nudge' feature that way, ie some sort of keypad window that let me slew very slightly to get an object dead centre. I know that within Stellarium I can move the view slightly and slew to centre, but I'd prefer a keypad-type feature, it just seems more intuitive. I fiddled around with ASCOM and EQMOD and somehow got an ASCOMPAD utility that looked promising. However, it would only work with east/west slewing, not north/south. Odddddd. I invested in the official SkyWatcher USB cable and still no joy. Then I noticed another larger keypad with a 'Stop'button in the middle. If I clicked the direction arrows on that, no response from the mount. However, If I clicked the 'Stop' button, the first keypad worked. Oddddddd, again. Not ideal, but sort of a rough and ready way to get this to work. However recently, for some reason, that doesn't work any more. I have to click Stop every time before using north/south. Very oddddddddddddddddddddddddd. So I decided to bite the bullet, instead of installing stuff I didn't really understand and getting it to work partially, I decided to uninstall it all, work out what I should be doing, ideally using ASCOM so that I have a good foundation for adding stuff as I go along, and start from scratch. I've installed the ASCOM platform, and I'm now desperately, desperately trying to figure my way through the instructions at both http://www.atm-workshop.com/synscan-pc-connect.html and https://www.lightvortexastronomy.com/tutorial-setting-up-an-equatorial-mount-on-ascom-with-eqmod-stellarium-and-cartes-du-ciel.html# They're well-meant and very comprehensive, but I'm lost at page two of both! Progress so far: I try to download EQMOD from https://sourceforge.net/projects/eq-mod/files/ but the latest download on the page seems to be ASCOMPAD. Don't understand. Find what looks like EQMOD, run it, click the Register button, get an error. Don't understand. Uninstall it. Go to the Yahoo Group at https://groups.yahoo.com/neo/groups/EQMOD/info but I have to register to download the files. Done, but how long do I wait now? I've shouted at the cat but she doesn't want to help. I should add that I have a degree in IT, used to be a programmer, have built my own PCs in the past, have worked as a technical author, and am pretty tech-savvy. But after two hours of this, I have to admit I am completely and utterly confused. I understand drivers, software and hardware but this seems such a fragmented environment, I'm far from clear what I should be downloading or running. Can someone point me to a resource that quite literally lists the steps for getting what I want? I just want to align the SkyWatcher mount with the handset in situ (I find it easier that way), which is connected to my laptop via the USB cable, then after alignment, go inside and drive it via Stellarium, but also have some sort of keypad window, or something that works off the numeric keypad on the laptop, for fine adjustments so I can centre the object in my camera. I'd like to do this via ASCOM because I have a strong feeling it'll be a good foundation for adding kit in future. Any advice? I'm sure lots of people have asked this question before but I've looked through the forum and there seem to be lots of bits of info here and there, just no single resource that is succinct and easy to understand. Apologies if this is annoyingly basic, Thanks Brendan

Thanks! I think the sensor is sealed into the unit on my (very cheap) camera - see https://www.bresseruk.com/bresser-mikrokular-full-hd-eyepiece-camera.html) but it's definitely something to bear in mind if/when I upgrade.

Vendor reply: sadly this is very common on all astro cameras no matter how well kept. Seems to be the case! OK, well, onward and upward as they say... Thanks, Brendan

Well, that was partly what bothered me - if I'm going to want to view sunspots (which I will), then how will I know what's a sunspot, and what's a, well, spot?! I think the answer is that they'll look quite radically different, plus I can start looking into flats to help subtract out the dust spots, and post-processing of the image too. I'm still contacting the vendor to ascertain whether they think it's a problem with my particular camera. In the meantime I must admit I do feel a hell of a lot better about it all after the advice here. I've been on forums before for other stuff, mainly computer tech sorts of things, and they're such great resources for this sort of thing. Thanks all for your advice, it's been really helpful.

Hmmm, I think you're right - the spots should stay in the same place because they're on the sensor, everything else should move. Thanks for the help again. I think I'm going to contact the vendor of the camera because I'm not particularly happy that it should get like this so quickly. But, as you say, perhaps that's just our lot in our dirty, dirty world.

Hi, just as a check, I've tried cleaning the camera (can't get to the sensor unfortunately) and one thing that I've noticed is that, when I rotate the camera in the eyepiece holder, the image rotates in SharpCap - but the spots do not. Would this be the case if the dust was on the sensor? Surely the spots would rotate with the image? I have to say even trying to imagine this, even drawing diagrams of 'this bit rotates so this bit doesn't', with the interactions between the primary, secondary, camera and 'real world' is hurting my brain. If it makes sense that the spots would stay in place if it's the camera, then do you think it's acceptable that it could get so dirty so quickly? I've used it, what, ten times and been careful to protect it in storage etc.

Hey, thanks for such quick advice, both of you. You beat the Astronomy Shed hands down. I'll take another look at the camera - and I take your point about post-processing, that's how I got around the problem at first before deciding to address it properly. Cheers, Brendan

Hi all, I bought a SkyWatcher 130p Synscan end of last year. I've started taking stacked photos using the Bresser HD Mikrokular camera - all very basic I know, but these are my first steps. The first shots I took were great. However, the last time I noticed there were dark specks on the image. I've checked the camera, eyepieces and secondary mirror and they all seem fine. However, when I shone my mobile phone torch into the scope, I could see what looked like little dust particles on the primary. So, I took the (for me) big step of removing, cleaning and collimating it. I think everything went ok. However, I can still see the specks on the primary, and unfortunately the image from the camera still has spots on it. Here's what I'm seeing: This is with just pointing the scope at the (very grey) sky so that I can see any spots that appear against a blank background. I think the mirror is fine for viewing, but as you can see, not at all suitable for photography. This is especially going to be a problem if I want to start solar imaging, which was my intention in the near future, for sunspots. I need to know whether it is indeed the primary mirror, if so what I can do to fix it, or even whether I can buy a replacement if something has gone terribly wrong with it. I was very careful to clean it properly as per videos I found on YouTube (warm water, touch of detergent, distilled water rinse). I don't know what the marks are - pollen? Any ideas? Any/all advice appreciated. Thanks Brendan