-
Posts
141 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Blog Comments posted by furrysocks
-
-
The better of the two primaries measures somewhere between f/7.57 and f/7.575.
-
I now have the mirrors - both are 8.5" and around 40mm thick. There are many surface scratches and scuffs on both and light will shine through from the rear in a number of places. Though I have an untrained eye, one appears just good enough to use in the first instance. The two flats both definitely need to be done before use.
The flat that is fixed onto its holder appears to be done so with a layer of green felt/baize and glue and there is sign of the same on the back of the other mirror. I think that carefully running a hacksaw blade back and forth down between the mirror and holder will slowly remove this material and separate the mirror.
When I send the first primary away for testing, I am also considering whether or not to obtain a test report - primarily out of interest, but it may prove useful if/when I come to sell.
Mirrors acquired
in DIY Build - 8.5" reflector
A blog by furrysocks in General
Posted
Secondaries sent off for re-coating.