ckp82

Thanks. I've just downloaded this and I like how it tells you what targets are up in the sky in real time. You have to press the search button and scroll down rather than the info button 😉

After a closer inspection, it does look like there is allen key bolts inside. Unfortunately, I don't seem to have the right allen key for it. I'm used to the flextube 130p which uses thumb screws for both locking screws and collimation screws (see attached image), hence why the 200p looked a bit bare. I usually slack off the locking screws, then do the collimating and tighten up the locking screws. Can I get the same type of thumb screws for the 200p as the 130p?

I bought a used skywatcher 200p dob about a year ago on impulse and it's been gathering dust in the shed ever since as I've been using an e.a.a set up. Today I cleaned it all up and put it back together only to find that when I come to colimate it there were screws missing on the back of the primary mirror. Are the screws missing the same ones that use the springs? Please see attached photo. Where is the best place to get replacements from? Thanks.

I managed to find the video of the moon that I couldn't find before. Apparently if you save in mpeg the video saves to your tablet, if you save in avi it saves on the asiair. I'm yet to try the latter. I like the fact the video has the asi watermark and they even add music. 2024-08-20-10-24-16.mp4

I also have one on the way after a bit of delay it should be here soon

I better free up the space on the emmc or get a huge sd card. The moon was just rising in the east and m16 was more south West for me, still not ideal for imaging with how full the moon is I guess. Normally the clouds roll in just as I finish polar alignment 😆

I managed to get out last night hoping to try and video the moon and try the stacking mode in asi air plus. The video wouldn't save, it said mp4 saved but it wasn't in the video folder. I had 9.4gb of storage left, could this be the reason? I settled with a screenshot from the preview screen. Whilst I was waiting for the moon to rise over the trees I had a go at m16. I couldn't make out the pillars of creation but I got some basic shapes and colour.

Last night I had a look at M52 and noticed that the bubble nebula would fit in the same field of view, so I decided to centre the bubble and have M52 off to the side instead. You will have to zoom in to make out the bubble.

@Elp I did wonder what the reset did as I noticed the firmware hadn't changed or any photos deleted. Hopefully, it was just throwing a wobbly. If it happens again at least I can try manually moving to the home position and follow your steps from a previous post and not press the reset button 😆

Last night I uninstalled the asiair app and reinstalled it. I also pressed down the reset button on the asiair plus. This morning I went outside and polar aligned before putting it into home position without a problem. From there I went to Deneb and then onto capella, both were centered on the screen. Hopefully this has cured it.

@Elpif it uses the phones location should the time on the asiair app match the phones time? Mine is an hour behind

@Vroobel I never thought of the update. I did do mine about a week ago though as it had been standing a while

What is home position? I guess it's true north because normally once I've done the polar alignment I send it home and it seems to point just left of polaris. Last night the telescope went upside down and ended up pointing east. It's a good job I unplugged the camera or the cable would of hit the pillar. I set up in a different position than normal so I could view over the house but that couldn't send it awol could it?

At the moment I'm observing from home so it's plugged into the mains.

I've never had a problem with my azgti misbehaving or my asiair plus, but tonight I did my polar aligning and put in vega for the goto to take me there and it went in the opposite direction. I put it into the home position and it went to some random position. I have used the same equipment and done the same procedure as I normally do and have never had this problem before. I checked the location setting and it had the time set as an hour earlier. I don't know if it has always been like this or if it's a glitch? It says to turn off dst on hand controller but I don't have one. Does anybody know what has suddenly happened to my set up and how to rectify it? Thanks.