adywhitwell

It's pla and the strippers are running slowly so don't get hot especially outside. I am now designing the mount for Dec so I can use them with a raspberry ok as a go-to as well as just tracking for photography. The motor mount holes are slotted to allow for a bit of drive belt tensioning. Will have to get a few micro switches to detect and of travel position

Hi Put this in the wrong place as I'm new on here. I have designed and printed a mount to fit a nema 17 motor to the ra of an eq5 mount and am happy to give anyone the stl file or print at cost and postage for those without 3d printer. UK based

Sorry wasn't sure where to put it but finally got new bolts to mount it

There are just inhibited sprays for motorbikes that work well. Very thin coating and all is good, also good old wd40 around electrical parts helps

Sorry if this is the wrong place to post. I have designed a 3d print file to fit a nema 17 motor in place for ra control. I'm just waiting for some longer bolts to fit it but all looks ok. If anyone wants the stl file to print please get in touch. If anyWays a printed part after I have finalised and checked it (5th iteration now) please get in touch