Hedlund

I tried to swap the motors and both motors work separtly. Then i tried to swap the cabels too the motor and both works. I took apart the controlmodule to inspect the motherboard and soldering, I found some bad soldering/cracks on the board. Then I took apart both motorn and test it on the bench, now both motor works and no noise from dec motor. Now im gonna to resolder the bad soldering and hope it works. Thank you all for the help.

Hello I have have a eqm-35 pro and i have a problem with my stepper motor on dec axis. Its making grinding noises. It dosent turn. I disassemble the dec drive and found that the stepper motor was bad. I have checkt on the internet for a replacement part but I only find steppermotor for eq3/eq3 pro. I wounder if anyone know if it the same stepper motor on the eqm-35 Pro?

Yeah i think so too. Nothing i can see, but I hade the dslr standing on the desk a few days ago And i have a 2,5 year old kid running around, so i suspect what can have happend 😅

I like to thank you all for the replys and help. Sorry for the late update from me. I found out what was wrong, it was the dslr (600d) itself the was broken. Something has happend to the camera. I thought it was working because i was testning it with a canon lens some days before, something must have happend after that, because now i cant focus with a canon lens. And i borrowed a friends 600d, unmodded Camera and that will focus.

Hello I have problem to reach focus with my dslr camera attach to the telescope. The telescope is a Sw150 pds, and my camera is a canon 600d modded. I can reach focus with my old dslr, canon 450d, but not with the 600d. I have tried with a lower t-ring adapter, And with extension tubes. It feels like it need to further in, but it cant go more in. I can get it to focus if i use a barlow lins with a extension tub attach. Is it something i do wrong?

I finally get it to work. I downloaded a older version of the synscan app 1.19.16. Now it connects perfect, but the location sensor dosent work, i have give the app permission to use gps location, but the app frezzing and crashing. But I can mannualy input the coordinates so its no problem. Thanks to all for the help 🙂

Okey, the wifi dongel i new i box, i hade this problem from start. I had a az-gti with the same app and that work perfect. Okey i should try that.

Yeah, i found and connect to the synscan wifi, but when starting the app to connect it dosent work. I have android so i downloaded it from the playstore. Okey, perhaps i should try a diffrent version of the app.

Yes exactly in that order

Hello I have bought a synscan wifi adapter dongel to my eqm-35pro. But i have problem connecting to my phone, i says cant connect to mount, communication error. I can connect to its wifi, but cant connect it with synscan app. I have tried diffrent phones, same fault. I have tried to reset the wifi dongle by leaving it on for one hour. And tried to reinstalling the app. I cant get it to work.

Around 500-600$ if its possible

Okey, thanks for your reply. Can you recommend any camera.

Hello Im looking for advice for a affordable price camera for my telescope, Skywatcher 150pds. For planets observing and deep sky pictures. I have been looking at a Zwo ASI662MC, is this camera good for multipurpose use? Or should i looking at a dslr camera instead. Thanks in advance.

Okey sorry to hear that. My az-gti stopped working after a few days i got it to. When I rotated it manually and also with the app control, so at a certain position on its axis it stopped working. I got my exchange on warranty. That would be great