ckp82 Posted Saturday at 17:51 Share Posted Saturday at 17:51 I bought a used skywatcher 200p dob about a year ago on impulse and it's been gathering dust in the shed ever since as I've been using an e.a.a set up. Today I cleaned it all up and put it back together only to find that when I come to colimate it there were screws missing on the back of the primary mirror. Are the screws missing the same ones that use the springs? Please see attached photo. Where is the best place to get replacements from? Thanks. Link to comment Share on other sites More sharing options...
NGC 1502 Posted Saturday at 18:42 Share Posted Saturday at 18:42 Are you quite certain those screws are missing? Take a close look because you may find allen head (hexagon) screws in the 3 recesses. A torch and magnifying glass may help. 1 Link to comment Share on other sites More sharing options...
Astronomist Posted 22 hours ago Share Posted 22 hours ago Those are the collimation locking screws, many people choose not to use them, as tightening them can throw off the collimation. Certainly they are not essential. If they are missing and you do wish to replace them the best place to get new ones is probably your local hardware store, just measure the hole and buy some appropriate metric thumbscrews, most likely M5 or M6. 2 Link to comment Share on other sites More sharing options...
ckp82 Posted 12 hours ago Author Share Posted 12 hours ago After a closer inspection, it does look like there is allen key bolts inside. Unfortunately, I don't seem to have the right allen key for it. I'm used to the flextube 130p which uses thumb screws for both locking screws and collimation screws (see attached image), hence why the 200p looked a bit bare. I usually slack off the locking screws, then do the collimating and tighten up the locking screws. Can I get the same type of thumb screws for the 200p as the 130p? Link to comment Share on other sites More sharing options...
NGC 1502 Posted 10 hours ago Share Posted 10 hours ago 1 hour ago, ckp82 said: After a closer inspection, it does look like there is allen key bolts inside. Unfortunately, I don't seem to have the right allen key for it. I'm used to the flextube 130p which uses thumb screws for both locking screws and collimation screws (see attached image), hence why the 200p looked a bit bare. I usually slack off the locking screws, then do the collimating and tighten up the locking screws. Can I get the same type of thumb screws for the 200p as the 130p? The thread will be a commonly found metric size. Many DIY stores would stock hex head or Philips head bolts to replace the original recessed Allen screws. Alternatively if you retain the originals then the Allen key will be an easy to find size. Link to comment Share on other sites More sharing options...
Mandy D Posted 9 hours ago Share Posted 9 hours ago @ckp82 IIRC the grub screws that lock collimation on the 200P are M6 and about 10 mm long. I don't know what end they have, but they can be had with flat end, recessed end, ball end and spike end. I think a 3mm hex key is the correct size. Link to comment Share on other sites More sharing options...
RT65CB-SWL Posted 8 hours ago Share Posted 8 hours ago I mainly buy my metric fasteners from here: https://www.gwr-fasteners.co.uk/ via their eBay outlet/store. If they are imperial or metric, then here: https://www.modelfixings.co.uk/ If I need them asap, then I visit these guys: https://www.precisefastenings.co.uk/ as I am local to them. Someone also makes homemade jams and preserves for them to sell… hard to resist. When buying Allen keys from the DIY stores or supermarkets, don’t go for the cheapest ones. I was replacing the bottom case screws on my Panasonic ToughBook CF-19 laptop with some replacement Allen screws and the Allen key snapped… and it was not even tight. When I checked the package of Allen keys, it said they were made from carbon steel. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now