Busy ... please wait

[Raindes]

My 700D suddenly stopped working and freezes with a "Busy ... please wait" on the LiveView or "busy" on the top panel in non-LiveView mode. Powering off the camera doesn't help. Only way is to remove the battery and re-insert it. No images saved. Happens with or without an SD card inserted.

I tried to change the card to delete all the data on the card I tried to reinstall the firmware, but everything is exactly this problem

[michael8554]

If removing the battery cures this, than it's not a camera setting that's wrong.

Same with no lens ? Not connected to a PC ?

I read somewhere it could be "Canon's way of telling you to buy a new camera".................. 😆

Michael

[Raindes]

47 minutes ago, michael8554 said:

Если удаление батареи излечивает это, то это не неправильная настройка камеры.

То же самое без линзы ? Не подключен к компьютеру ?

Я где-то читал, что это может быть "способ Canon сказать вам купить новую камеру".................. 😆

Майкл

same problem without the card and without the lens, I can't even turn off the camera, I need to take out the battery

Edited April 26, 2021 by Raindes