QHY10 osc with APT

[Synchronicity]

New to me QHY10 OSC camera and I've downloaded APT v3.84 to use with it.

When I connect to the camera with EZCAP te images are fine (trees cos I'm trying to set up for tonight.

When I connect APT and take an image it is like the second one below - the first one is from Pixinsight after debayering.

I know the camera delivers data ok from EZCAP and I think the issue is something to do with the 'overscan area but I can't find anywhere to change a setting in APT to adjust that.

Any help much appreciated!

Michael

#

 

Edited July 23, 2020 by Synchronicity

[Synchronicity]

Solved. I'll post details later just in case it helps someone down the line...

[Synchronicity]

For completeness, in APT Camera tab, hold down Shift and press Connect.

This brings up a "Select Camera Type"  dialog box were I select CCD:ASCOM Camera.

Click OK and the Ascom Camera Chooser comes up where I selected QHYCCD-Cameras_Capture

Select Properties and that brings up the that then brought up the dialog box with an option to "Remove Overscan Area".

This can also be started by navigating to the DriverConnect32 folder and running Ascom.Driver.Connect.exe

 

Hopefully this will help someone in the future...

Michael