KyleStoke Posted November 13, 2013 Share Posted November 13, 2013 Hi allI have an Atik 428ex sw 80ed + flattener/reducer, xagyl filter wheel.How do I connect them up? Do I need an adapter to attached the filter wheel plus assorted spacers to the back of the f/r? All help is much appreciated Link to comment Share on other sites More sharing options...
KyleStoke Posted November 13, 2013 Author Share Posted November 13, 2013 Do I need to buy an m48 to t-thread adapter? Link to comment Share on other sites More sharing options...
KyleStoke Posted November 13, 2013 Author Share Posted November 13, 2013 anybody out there Link to comment Share on other sites More sharing options...
m37 Posted November 14, 2013 Share Posted November 14, 2013 HiI don't have any of that equipment but I can hazard a guess.I imagine the flattener would be M56 straight on to the drawtube (although you don't specify which flattener you have) leaving you an M48 thread which you need to connect to the filter wheel, usually a t thread. I presume this means you do indeed need an M48 to T adaptor. Once the filter wheel is attached to the FR you just need to put the T thread to 1.25 barrel adaptor into the filter wheel (should have come supplied with one) and the Atik will sit in it nicely.That's just thread sizes though, spacing requirements for focus will vary according to the specific components you have.A T to M48 adaptor wouldn't cost too much and it will give you an idea of where you need to be. Presuming your filter wheel came with the usual accessories.This is the kind of thing http://www.firstlightoptics.com/adaptors/flo-m48-to-t2-adapter.htmlIf you want to get an answer from anyone here who has the same setup you would be best specifying the exact make and model of all components and the configuration you are trying to acheive. Alternatively drop FLO a line and ask if they have what you need, they will sort you out.cheers and all the bestChristoph Link to comment Share on other sites More sharing options...
KyleStoke Posted November 14, 2013 Author Share Posted November 14, 2013 Hello ChristophThanks for your replyMy spacings are all pretty much sorted, the issue was the m48 to t2 part i just couldn't get my head around it yesterday (probably because i haven't actually got my filter wheel yet)I came across the part you linked in and ordered it yesterday, it came today and works a charm.I'm all ready to go now once my filter wheel turns up.thanks again for your help Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.