Jump to content

NLCbanner2024.jpg.2478be509670e60c2d6efd04834b8b47.jpg

EP covers/caps


autonm

Recommended Posts

The chrome barrels that fit into the focuser are a standard size, some available here http://www.scopesnskies.com/cat/astronomy-eyepieces/antares-eyepieces.html#Eyepiece-storage-and-maintenance

The caps that fit onto the other end are not a standard size, loads of different ones that don't interchange between various makes.

Also in that link are plastic 'bolt' cases, these could be ok for you.

An easier alternative is to use small plastic bags, they keep the dust out, but of course don't offer much protection. But if you keep the eyepieces in a case, plastic bags are fine.

Regards, Ed.

Link to comment
Share on other sites

You can also try astrospares on US ebay. They have a good selection of rear caps for various eyepieces.

If the total cost of caps and shipping is below £15 then it's exempt from import duty and VAT.

http://www.ebay.co.uk/sch/astrospares/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686

I used them before and they delivered within a week, which is quite good for international shipping.

If you are just looking for bolt cases and standard 1.25" or 2" caps then astrodevelopments on UK ebay sells them

http://stores.ebay.co.uk/astrodevelopments/Bolt-Cases-Protection-/_i.html?_fsub=2240814016&_sid=984688566&_trksid=p4634.c0.m322

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.