cosmojaydee Posted October 24, 2012 Share Posted October 24, 2012 Having purchased HEQ5 Syntrek, is it possible to use Stellarium as a stand alone goto or do you have to have the Synscan goto hand control unit running ? Jeff Link to comment Share on other sites More sharing options...
Black Knight Posted October 24, 2012 Share Posted October 24, 2012 Certainly with an EQDir cable, Ascom, EQAscom and CdC you don't need the handset. I'm not sure about Stellarium. Link to comment Share on other sites More sharing options...
The Sailor Posted October 24, 2012 Share Posted October 24, 2012 When you have installed your mount in Stelarium you can click on a target and your mount will slew to it without any other software being needed.Jim Link to comment Share on other sites More sharing options...
cosmojaydee Posted October 24, 2012 Author Share Posted October 24, 2012 When you have installed your mount in Stelarium you can click on a target and your mount will slew to it without any other software being needed.JimHow does the Stellarium progam know what the telescopes starting point is if I don't have the ability to do a star alignment? Link to comment Share on other sites More sharing options...
The Sailor Posted October 24, 2012 Share Posted October 24, 2012 I am assuming you have the mount connected to your PC/laptop with a USB/Serial adapter.You have to use your handset to get your alignment, then when that is complete check which Com Port your mount is using, install the mount in Stellarium and configure the port, also tick the box at the bottom to ensure the bullseye will be on screen, close Stellarium and restart and the bullseye will be onscreen, mine is always in the region of Polaris, click on a target and the mount should slew to it if you have set up correctly.Jim Link to comment Share on other sites More sharing options...
cosmojaydee Posted October 24, 2012 Author Share Posted October 24, 2012 Sorry if I was not clear enough , or I am being thick , I do not have the Synscan goto hand set only the Syntrek none go to , so as far as alignment is concerned this is not possible with my current hand set , so the question would be is it possible to use Stellarium without doing a star alignmentJeff Link to comment Share on other sites More sharing options...
The Sailor Posted October 24, 2012 Share Posted October 24, 2012 No Jeff, Stellarium needs the mount aligned to slew to a target. What you could do is do a search on the forum for alignment with the gear you have or hopefully there will be someone along who knows how to sort out your problem, sorry I could not help.Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.