Star Diagonal problem.....

[Jandy100]

Need some advice regarding 2" star diagonal to my Evostar 120mm Refractor. In the photo where the eyepiece holder goes, it should be secured by 3 small screws.

As you can see where the screw hole is, I have one missing. Can anyone help where I may get a replacement screw from? Thanks for assistance.

Andy. Milton Keynes

[damnut]

Hi Jandy100,

Is the missing screw the same as the others that are alredy there??.

Your 2"diaonal should come with an insert to use 1.25" eyepieces. If you do not use the insert then you could take that screw and use it for the missing one.

Best place for odd bits is :---http://www.scopesnskies.com/AstroBoot

Clear Skies

[Jandy100]

Damian,

Many thanks for your help. I have sent an email to info@scopenskies to see of they have any in stock.

Hopefully, they will. Would be such a problem I guess if I was using 2" eyepieces then there would be no requirement for securing the eyepiece adaptor.

Thanks again....

Andy

Milton Keynes

[damnut]

Hi Andy,

Would have been easier if I had a spare!! Would have popped in the post. They should sort you out for little dosh!!

Cheers