-
Posts
108 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by Nojus
-
-
-
1 hour ago, AstroNebulee said:
This is so very very strange and you say this is the same on your laptop?
yes,it is
-
well ,today was my next attempt,outside the city,where no other wifi signal was , and no success again, the only difference was hat application show IP 192.168.4.4 instead of IP 192.168.4.1 . FLO told me to do the same as you guys told ,I tried to do with completely other smartphone, and the same result.
I have no more ideas what to do next, SynScan see head and at the same time say "no device found"
- 1
-
-
On 26/06/2021 at 15:46, AstroNebulee said:
Hi @Nojus how is it going with your mount, I'm intrigued
Today I've reinstaled syn scan and went out of city to try connection,even installed syn scan to other smartphone,app see the mount bet still saying not find,see pictures,perhaps I need new head,I will try to contact FLO before buy.
-
I did it already ,turned off router and started from begining,but sure will do it again,thanks for support guys..
- 1
-
I will do it again tomorrow,now at work,but guys how about hand controler use,perhaps this can solve my problem?
-
54 minutes ago, cwis said:
From the original post the connection to the mount SSID had been made, but the IP of the connecting device had been manually changed to 127.0.0.1.
I don't think this issue is anything to do with using station mode or any of the other functionality of the mount - just the issue above. Forgetting the wireless network and reconnecting should fix.
I've got this mount - the instructions could certainly be clearer (much much clearer!) but I've never had any issues connecting to it with a plethora of devices - including a joystick controller I made for it with an ESP32 running Micropython. I found looking at my phone to choose another goto target was destroying my night vision. IoT is certainly a rabbit hole...
funnies thing is that a month ago it worked with both my tablets android 4 and 10 just fine..
-
I got this from astroshop.eu in 2018 and guaranty is covering anymore. Sure I will try to ask FLO about it..if not will buy another one.
I've tried to do it with other devices and my mount without success.so assume the mount issue here..
-
-
6 hours ago, powerlord said:
So I've had that with one of mine.
Basically you are saying you cannot connect to the synscan's wifi hotspot yes ?
is it using batteries ? If so, change em and stick new ones in and try it.
If it's using a power adapter, check its putting out more than 12v. i.e. 12ish-14 or so.
stu
I've tried batteries,power bank and 12.8V DC,not helpful.
- 1
-
Now trying to reset head wifi to factory settings by connecting to power for 4 h,lets hope it will works
-
regarding Android version, both Android 4 and Android 10 not working, although it worked before both.
And to update firmware need wifi connection between laptop and AZ-GTI, so it is not possible ,that's the my main problem ,no connection between head and laptop or tablet.
- 1
-
regarding Android version, both Android 4 and Android 10 not working, although it worked before both.
-
-
-
-
2 minutes ago, AstroNebulee said:
"SW AZ - Gti mount firmware update?? - Discussions - Mounts - Stargazers Lounge"
thank you very much, will try after work. Have a nice day
- 1
-
it is not under guaranty anymore, how to install a firmware in this case?
I have site as this Sky-Watcher | Sky-Watcher Global Website (skywatcher.com)
But don't know how to install.
-
also reinstalled synscan and went outside out of range of routers ,but no luck. Strange thing, because it worked before. I'm getting crazy already about it..
-
yes, I've turned off my home router but there is no success. I tried to do the same with other device, but nothing better.
-
-
-
Skywatcher AZ GTi - Cannot Connect
in Discussions - Mounts
Posted · Edited by Nojus
for now I'm happy , when have time will update on upgrade, this summer have to go to good site to observe in travel mode.My big boy EQ6 R works perfect..