Jump to content

Banner.jpg.b83b14cd4142fe10848741bb2a14c66b.jpg

Haggish

New Members
  • Posts

    5
  • Joined

  • Last visited

Posts posted by Haggish

  1. 1 hour ago, Xplode said:

    This sounds like a classic problem with flex.

    I guess you'r guidescope is an ST80, these are known to have a lot of flex in them like they come from the facory, there's also some mirror flop in your LX200R scope and both these problems cause streaking stars.

    I'll also mention that your setup is not ideal, your DSLR is not suited to the scope at all since you are way oversampled at 0.49 arcsec/pixel, this with an older noisy camera is a setup that is hard to get good results out of without a lot of trouble.

    Hi Ole,

    Thanks for replying

    If you read my post again you will see that my stars is " were round and fine throughout the image ". so I dont thing flex is the problem nor mirror flop (the LX200r has mirrorlock)

    That's why this is a great mystery too me

    due to the eos 450d is one of the DSRL that is the best due to noise

    see link. http://dslrmodifications.com/DSLRcomparison.html

    -Geir

    PS Ole Bare for og presentere meg på Norsk, Jeg er den Geir som solgte dere 16" som dere har i observatoriet deres på Hågar ;-

  2. Hi guys,
    My name is Geir and I'm from Norway I'm new to this forum.
    My observatory equipment are: Telescope meade 14 " lx200R OTA @ f:6.2. Mount EQ8 Camera eos450d without IR filter, but with LPS filter.
    Guiding: Telescope: Skywatcher 400mm refractor Camera DSI II.
    I use phd2 to guiding and EQmod for telescope control.
    So my problem. Here one evening I took 20 exposures a 5min of NGC7331 with guiding within +/- 1 "and the stars were round and fine throughout the image, but when I check the frames I see that all the stars move significantly towards the west in the image.
    How can this be possible?

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.