axle01
-
Posts
111 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by axle01
-
-
Nice work mate, I found the problem was the grub screws.
Al
- 1
-
Yeah I returned mine but came back the same, maybe they dont know the problem and how to fix it, anyway I found the problem and fixed it,,,,now no more binding.
Al
- 1
-
9 hours ago, TSRobot said:
My azgti is fab for most things including my first time solar tracking today.
However when I move the mount manually the azimuth (left right) is always stiff. I have the black screw completely in done.
Not sure what to try without returning it or dismantling it a bit.
I had exactly the same problem so I sent it back for warranty repair, after 2 months it came back exactly the same, so I pulled it apart and found the problem and fixed it.
Refer to page 20 my post 486 and read on.
https://www.cloudynights.com/topic/586532-new-skywatcher-az-gti-goto-wifi-mount/page-20
- 2
- 1
-
Changed the clamp to a smaller one.
- 4
-
Gavin the spacing diagonally is 28mm hole center to hole center and 19mm from hole center to hole center where your clamp is 20mm and a 6.5mm hole by the look of it.
I found the clamps I had the predrilled holes were 25.5mm and drilled for 1/4” bolts.
The AZ-GT I bolts are M4.
Al
- 1
-
I never liked the AZ-GTi saddle clamp so i removed the tin cover inside the clamp which revealed 4 screws, i removed them and the clamp then I dug out a saddle from the spare parts box, i had 3 but 2 had pre-drilled holes in the centre that didn’t line up with the AZ-GTi mount holes but the ADM saddle had no pre-drilled holes so i removed the AZ-GTi saddle and clamped it on the back of the ADM saddle and drilled 4 holes and i now need to go the the bolt shop on Monday and get the correct length bolts then countersink the holes,,,,,easy-peasy.
Al
- 5
- 1
AZGTI stiff
in Discussions - Mounts
Posted
Sounds good now you can repair others with the same problem.
Al