Dear all,
I finally got the 3D printer shroud and the flocking material.
I would like to share with you my first attempt at customizing my telescope. If you have a Skywatcher Heritage 150p, feel free to contact me!
Thanks to @NGC 1502 and @Ricochet for their support 🙂
Here the 3D printed shroud in its beauty. I ordered it through CraftCloud and it has been printed in Poland. I took the cheapest supplier. It costed in total 30 EUR, of which 15 EUR delivery to Switzerland. It took two weeks between order and delivery.
1) I removed the part of the telescope containing the truss poles, the secondary mirror, and the rest.
The best was has been to remove the dovetail from the OTA and after it three small screws holding the structure to the OTA
2) Then I tried to check if the 3D printed shroud is OK or not.
3) The Shroud needs definitely some flocking
4) After flocking. Flocking material is some cheap stuff I bought from Etsy. I think it works well for what it's worth.
No reflections in my opinion.
5) To fix it to the movable part, I glued it to the existing small plastic structure behind the secondary mirror.
I used "TESA Powerstrips".
5)
6) And... ta daaaa... My telescope is like new.