palfarano

Where have you attached it on the heritage 150 p? Thanks

Dear all, I finally got the 3D printer shroud and the flocking material. I would like to share with you my first attempt at customizing my telescope. If you have a Skywatcher Heritage 150p, feel free to contact me! Thanks to @NGC 1502 and @Ricochet for their support 🙂 Here the 3D printed shroud in its beauty. I ordered it through CraftCloud and it has been printed in Poland. I took the cheapest supplier. It costed in total 30 EUR, of which 15 EUR delivery to Switzerland. It took two weeks between order and delivery. 1) I removed the part of the telescope containing the truss poles, the secondary mirror, and the rest. The best was has been to remove the dovetail from the OTA and after it three small screws holding the structure to the OTA 2) Then I tried to check if the 3D printed shroud is OK or not. 3) The Shroud needs definitely some flocking 4) After flocking. Flocking material is some cheap stuff I bought from Etsy. I think it works well for what it's worth. No reflections in my opinion. 5) To fix it to the movable part, I glued it to the existing small plastic structure behind the secondary mirror. I used "TESA Powerstrips". 5) 6) And... ta daaaa... My telescope is like new.

Hi there, Thank to you too, very good point! After having a look at the screws of the top part of telescope, I think you might have a good point! I have three options to insert the shroud. I think your proposal of removing the stoppers is the best one. Maybe I won't have to collimate the secondary at all. --> What do you think? 1) Remove the top assembly from the truss poles via unscrewing the pig-nose-screws 2) Remove the top assembly together with the truss poles via unscrewing the pig-nose-screws of the stops of the bottom of the truss poles 3) Remove the screws which holds the top assembly + truss poles from the optical tube. There are two screws going through the green bar (dovetail?) holding it onto the optical tube & the top structure. And also three screws holding the top structure onto the optical tube. You can see one in the picture above and also one example below. Cheers and thank you all for your support Pietro

Thank you! I had no idea of the name of this tool I will try option 1 for the moment 😅. SGL has been a great resource for me to start this hobby!

Dear all, I am a complete beginner and have a Skywatcher Heritage 150p with GoTo mount. I ordered at a 3D printer this shroud and to mount it I need to remove the "crown" holding the secondary mirror. The screws holding the "crown" look like a pig nose and the holes are 10 mm apart. Do you know any commercial tool to unscrew those? Thank you! Pietro