jimmerz50

Whats the difference between the EQMOD and EQDIR cables please? Thanks again!

Thanks again Peter - very much! Ill go back to using the dongle plus the app - but i was trying to get to using the laptop for guiding. Ill get the EQDIR cable and start that another time!!

Looks like i need a couple or at least one cable to go the wired route - Could I use the synscan wifi dongle i have ? And control the mount via Cartes du Ciel? Screenshot below

trying that handset to mount = OK after that, the mount was second hand so i dont have a serial cable that fits into the handset - i take it that has a serial on one end and the small phone type plug on the other, to go into the bottom of the handset?

oh damn!! got it as a bargain - now I know why So this one? https://www.amazon.co.uk/Skywatcher-Telescopes-Control-HEQ5pro-Synscan-pc-mount-grey-cable/dp/B085WSWWSN/ref=sr_1_6?dchild=1&keywords=EQMOD&qid=1585995803&s=computers&sr=1-6 (must be one that delivers to Ireland! )

some screen shots illustrating my stuckness! Still suspect the laptop is not aware of the mount! Jim

This is the cable I am using https://www.amazon.co.uk/gp/product/B06Y51HSC5/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Plugs to usb in laptop and hand controller port on mount (Newbie alert - thanks so much for your time guys!)

'Connection Error' port not available!

Thank you David I am on to that now - lsearching for a tutorial on EQMOD ASCOM set up

ASCOM platform reinstalled Mount connected prior to opening EQMOD EQMOD setup does not open when I click it ! ahhhhhrrrgghh!!! Thanks for being there Peter!! (I have windows 10 pro)

Do I also need soem form of ASCOM platform - had it on there but now removing all and going back to start!

Thanks Peter - I installed that but it keeps flashing up and off again on the screen - uninstalled and tried again - but no joy - still dont have the laptop controlling the mount hmmm (ill try an older version) - I am on an old enough laptop

Thank you Peter I have an EQDIR cable from the mount to the laptop USB in So I guess i dont need the mobile app! But in that case, I dont think the laptop has recognised the mount .. What software do i use? I installed EQMOD and it shows up as ASCOMPAD V2.09.. I go to devices / mount / connect - but nothing seems to click on the mount - like it does when I plug the hand controller in

Would love some help please!! I have altair guide cam connected to laptop by USB I have mount (skywatcher eq5 pro) connected to laptop (ubs to the hand contoller port on the mount) Mount is turned on I have the ascom stuff installed on laptop, and the EQMOD bit too I can not get the skywatcher app to connect to the laptop/mount as per the instructions below My intention is to polar aplign Star align, pref using some software on the laptop (with the nikon z6 through the scope - ES 102 ED) Take snaps using backyard Nikon stuck!!!! mobile phone pr laptop wont talk to the mount - message on phone is cannot connect - all bits are on the same network Any help very welcome! Jim Overview The SynScanMobile Telescope ASCOM driver is an alternative to the SkyWatcher Telescope ASCOM driver for controlling Sky-Watcher telescope mounts. SynScanMobile ASCOM driver requires the SynScan App, whereas SkyWatcher ASCOM driver requires the SynScan hand controller. During use, the SynScanMobile ASCOM driver controls the SynScan app. The SynScan app, in turn, controls the Sky-Watcher telescope mount. How to setup connection to mount Step 1. Connect SynScan App to mount Open the SynScan app on your smartphone. Use SynScan app to connect to the mount. See SynScan App's help for more details. You need to perform telesope alignment with the SynScan App before the mount can perform accurate go-to. If SynScan App is running on iOS, you should make sure the app is running in the foreground with the screen unlocked. Step 2. Connect ASCOM driver to SynScan App. Run program that uses ASCOM (such as Cartes du Ciel or TheSky) on the PC. The PC should be in the same network as the device running SynScan App. For example, if the phone running SynScan App has joined a SynScan Wi-Fi adapter's network, then the PC should also join that network. If there is problem with searching device, you can specify the IP of the device running SynScan App. ASCOM driver parameters Read timeout: How long to wait for response from SynScan App before reporting error Max retry count: How many times to wait for response from SynScan App before reporting error Shorter timeout and fewer retries lead to more communication errors, but longer timeout and more retries can make some program less responsive.