kamayok3

On 19/08/2023 at 05:40, rsarwar said:

Hi it was written to work from linux, but will work on rpi4. May also work on wsl.

Is it possible to change video resolution inside your apps?

On 26/11/2021 at 09:13, rsarwar said:

I am planning to get a 200 mm RC scope but i hate collimation process on my newtonian. i tried lasers and a cheshire. whilst i am able to get fairly okay collimation following testing with a LED torch under a Al foil with a pin hole, the process usually takes hours. and the results were never fully satisfactory . then i saw a Ocal Electronic Collimator on FLO and thought it should not be difficult to make it using a Arducam + some python/openCV coding. So I 3d  printed a 2 inch frame in which I screwed the camera. 

first impression, need to  reprint the 2 inch frame in red, so that it is easier to see on the mirror. camera i chose is a bit expensive but works well.

total cost was about 50 pounds for the camera. python codes and stl files are in https://github.com/rsarwar87/pyReflectorCollimator

camera: https://www.amazon.co.uk/gp/product/B07YHJK4LN/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I am having an issue running your .py files in Windows 10/11. I already have Python 3.11 installed.  Any guide on how to run it?

Best Regards,

Tom

Hi, how to add bignumbers code into the original code? I wish to make the sqm value in big fonts. 

Thanks.

No one seems want to check on the VL805 firmware. The latest VL805 eeprom firmware is one of the main culprit for this. I have my ASI120MC running fine on rpi4 4GB and 8GB board. 

Good luck.